Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

HR-2510 frequency issue


"seem to be untouched"

I know that you know better and have experience
repairing radios from your posts.

I have 2 of these 2510's that were given to me years ago,
due to problems there. the bands.

if was because of the modification to make them
go on U.S.A. CB ch 1-40 and beyond.

I found very sloppy soldering under that UC1201 board at the
modification spots. I neatly resoldered, and all good.

I have one powered up now with that 1201A chip.
has 9 bands. A - I A starts at 28000 E starts at 26000
G is ch 1 to 40 CB
 
in case you don't have them

HR2510 modifications.

hopefully you just notice bad soldering as I have.
That happened to me on some other radios, after the
"MARS MOD" has been done to them.
 

Attachments

Anyone have a board to compare with mine?
Mike
 

Attachments

  • 6615479500_1767224952.jpg
    6615479500_1767224952.jpg
    158.9 KB · Views: 15
  • 5759200100_1767224951.jpg
    5759200100_1767224951.jpg
    147.5 KB · Views: 14
  • 8305404100_1767224952.jpg
    8305404100_1767224952.jpg
    189.6 KB · Views: 14
I did contact him briefly
He said that he is aware of a guy in Australia that was writing his own software for the radio that limited it to 26-28 MHz.
I don't want to keep him distracted at work, I did share the link to the thread with him.
Hopefully he will drop in.

73
Jeff
 
  • Like
Reactions: sp5it

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom