You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
I found the am modulation adjustment in the so-called secretmenu of the Andy2, I'm putting in 1.75/2 watts deadkey and moves the needle to 3/4.5 watts as I say the ol dreaded "auuuuu....Dio" [.. THAT IS PEP or 'Swing' RIGHT? Idk, anyway.] "auuuuu,dio" before it even gets to amp. After that...
Too cool,been in Vegas for 5 yrs. Hoa community. No antenna. So I sloped 17 ft(11m) of 12 gage and center fed with 6inch coil of 5 turns a foot under my pvc center connection.About 8ft3inches per side of wire , Have + side 14 ft. up at peak of house about 28 inches away from actual house , the -...
No I understand completely ,when I do use my amp, I'm only going to be putting 1.5 to 2 watts. through it . but for now that's what I'm getting is the four and a half Watts thru the Meter,that's all I was stating. I have Andy2 by president and a little will 305 antenna on my car and I do 5to...
That's exactly like my inverted V. I tried and couldn't get a good SWR reading under three. Pretend that the floor of your balcony is the ground and the top of your neighbor's balcony bottom is the peak of my house plus 4 ft..... but same exact setup nothing behind it ,not hanging right on...
I have the crappy Workman 3p which is a dual watt meter and SWR meter but there's no other switches then forward and reflective and 10 watts and 100 Watts switches
I did turn my inverted V into a sloper and picked up and talked to the big boys locally and heard all kinds of skip today that we never heard before . It was very cool.you're right I'm not going to get out very far but I'm going to throw one of them little Italian amps on it and hopefully get at...
How do you check the difference between dead key and swing I have a Workman SWR and wattmeter but when I talk into it it doesn't seem to swing the watt meter it just holds steady at four and a half Watts any ideas am I using the wrong meter thank you for your time
I have a Workman SWR and Watt meter the cheap ones that are like 40 bucks when I dead key it it reads for Watts but when I talk and do it it doesn't swing up to higher wattage do them SWR meters act like that or am I looking at a totally different watt meter that I should be using to look at the...
8.3 foot legs,soldered good. I just put it up as a slope and swr came down to 1.3 and 1.5 ,my cb is pushing 5 watts .I can hear Florida, Washington,Dallas.....but no local chatter? Thanks for your help. I'm glad to see a forum with nice people. Some of these forums are not so good....thanks again.
Thank you for your reply, what about sloping it from peak to middle of yard away from house instead of vee or straight dipole? Should positive be up or put neg.lead up? Thanks again for sharing
Thanks for your reply. It all helps.and I do have problems with it. Can't get swr below 3. And can only get apex to 14 ft. Some one said I should be at 9 ft. Cuz it's a multiple of a full wave?
Thank you I have my dipole up at 9 ft (tried 14 ft. Same thing happens)with the legs spread at about 100° and I can't get my srw below 3. If I lower the center of the dipole about 5 ft off the ground the swr goes to 1.5 and I don't know why that's happening. But I cannot seem to get the Swr...
Thanks. Ya 9 ft is my start point I'm sure 8.6 will be around the final lenght. I'm using a coax choke instead of balun cuz I don't have any items to build that.im cheap.lol. clay roof.in Nevada. My biggest question is because the antenna is going to be mounted against the house, will radiate...
I have rubber insolated 8in eye bolts coming. I'm in a hoa. That's the problem here.lol. as long as I can keep swr and heat low, I think we will be good.ill boost up from 10 to 15 watts. Maybe even go to 20w if my neighbors radios doesn't go nuts...lol they are like minded , good old boys! They...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.