• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. N

    Cobra 142GTL My next project, Unable to get CT3 into spec.

    142 Tripler Offset with Clarifier. Notice C127 (220pf) from Emitter to Ground. C2000 (148 et al) has a second varactor circuit in place of the 220pf above, added to the Emitter of the 11 MHz oscillator, this is what gives the 2000/148/Grant the extended slide range, compared to the...
  2. N

    FT 2000 DMU w/ KVM Switch

    My guess is that the DMU is using a video mode or resolution that the KVM can not "see" to pass through. Check the specs on your KVM.
  3. N

    Galaxy N channel kit for the RS 465 and Cobra 146gtl

    https://www.worldwidedx.com/threads/galaxy-n-kit.265405/ https://cbworldinformer.com/channel-board-for-cobra-146gtl-uniden-pc-122xl
  4. N

    Yeticom Optima Mk3 Frequency Adjustment?

    https://www.repeater-builder.com/radio-shack/htx-10/htx-10-service-manual.pdf I have 2 of these.
  5. N

    Galaxy 959 extra channels ?

    Do you need just 1 or want to duplicate for later sales? I have 4 or 5 new old stock here, and a B (PLL version) too.
  6. N

    Galaxy 959 extra channels ?

    His oscillator has 1 trimmer cap per crystal, like an Expo100 A kit. I got them out of my storage a few months ago, and have them in one of my bins here at my place, but need to unbury them again. Several Viagra A style boards, and a B style with PLL. The B style only uses diodes to switch or...
  7. N

    RCI 2950 Tx on multiple channels

    Those spurs do not have any modulation components like the fundamental. Only carriers.
  8. N

    Cobra 29LTD cold dead

    If you are going to pull D19, make sure to swap it with another 5.1v Zener before turning it back on, if you just cut D19, that will unleash 13v into the PLL. It needs to be voltage regulated.
  9. N

    Cobra 29LTD cold dead

    Check the voltage at JP1 next to the PLL and C153, this is part of the voltage rail for the PLL and VCO IC's. Pin 11 (bottom right corner) and 16 are listed as VCC for the PLL. If it is Zero, pull and check C112 (red circle). D19 (5.1v Zener) could also be shorted...
  10. N

    Clarifier unlock for a Kraco KCB-2340 23 channel radio?

    Ground the RX side of that section of the relay, disconnect the TX side. Or, unsolder the Red wire back at the relay, solder it to Ground.
  11. N

    What year did the HR 2510 go into production?

    https://rigpix.com/cbfreeband/president_hr2510.htm Rigpix says late 1988
  12. N

    I need an IF tuning coil ECIFT12002

    Not the coil, you just have to find the same blue slug and replace it. Could try the red slug too, see if that works.. That coil is in the 455kc 2nd IF chain.
  13. N

    WTB

    W4KVW might still have one https://www.worldwidedx.com/threads/vintage-webster-bandspanner-80-10-meter-mobile-antenna.254061/#post-828017
  14. N

    Realistic Navaho TRC-432

    CBTricks .org - https://cbtricks.org/radios/realistic/trc_432/
  15. N

    Anytone At-6666 Pro

    Seller is also in ShenZhen CN.
  16. N

    142 GTL (PC-385 Chassis) extend clarifier range?

    The Cobra 142GTL (140GTL, Washington, et al) has C127, a 220pf cap from Emitter to Ground, where the C2000 (148, Grant XL, etc...) has a second varactor circuit from Emitter to Ground, in place of C127, this gives it the extra slide. L60 and L27 are fed from the same voltage feed from the center...
  17. N

    Galaxy 959 radio and others with same chassis Channel mod with crystals info needed

    https://cbtricks.org/radios/galaxy/viagra/ I have a Viagra A board in my PC122.
  18. N

    Road King RKCB Classic UT414

    https://fccid.io/AMWUT414/Test-Setup-Photos/Test-Setup-Photos-2892575