Search results

I dont know if i can co-phase this antenna. its horizontal and vertical and ive been thinking if it can be done, and what kind of wave it should do. maybe a spiral wave? im just so excited with this project

Specifications. AND FROM ANOTHER FORUM ABOUT POWER MULTIPLICATIONS. And here is the hard part. Every 3 dB of gain doubles your power. Your PDL2 with a DB gain of 12 will double power 4 times over (12/3). So if you input 4 watts the first 3 db will double it to 8 watts. The second 3 db will...

YES IT IS A PDL-II AV-122 IS MY SUMMER PROJECT IT NEEDS ALOT WORK. I WANT TO TRY SOMETHING DIFFERENT I NEED TO BE BUSY BEFORE THE COVID-19 DRIVES ME CRAZY

Do you guys think it’s a good summer project? Or any thoughts on if this a good DX antenna? Or just taking up space?

No effective way to get rid of that I know. OK at least it work very good.on ssb i love it. it going be on my mobil,the relay it tick hard and loud. i call it my old secretary :LOL:.

Yes SR.

Finally I have time to work, My little amp is a Sonar br-2906. It's tuned to an AM channel 20, I got 40 watts DK on AM. Then I did the jump mod for SSB. It does 56 DK WINT 150pep. It sounds really good on air, great modulation, but it has some RFI noise. Can someone help me find the problem I...

. yes because I test it for long time on the dummy load and the amp just got warm on ambient temperature of 46 f. happy new year and good luck for all of us.

after the 2nd alignment ssb usb/lsb is more balance about 150-175 pep (y) thank you, and 25 amp fuses (n)

Ok BY ic3 TP 4 c159(12p) it go to T26

I already did the alignment di not help. thank you Andy I check the component around usb can rignt now

Radio on tx AM 50(100 pep) watts, FM 100 watts, LSB 100 watts, now USB look, it tx 210 watts and blow the 20 amps fuses. what i need to do, thank. :confused::confused::confused:. how do I power balance?

Now available for 39.99 $ usd donation mmmm

so a old school texas start dx 667v with original toshiba cost 1000.00 $ right

YOU CAN SEND IT TO ROBALO :D

can you said Hi ! from Robalo please Mr Mustang 131 thank you

set every element for 6" of overlap and adjust the TOP section for resonance (ground plane elements are 4" per instructions). Maco suggests adjusting "T43P" (second section). I'd much rather have a solid 6" of overlap here. You will find that the top section will have close to 12" overlap. Since...

I been throuhg good cb staff

nice

helping the local