Search results

thanks for the links Unit_99 i did see all the dry transfer but nothing with # so I think I will try to make my own. Places with prices are outrageous. Might buy 1 of those cricut machines or use a program called EasyCut can make in there and print on some sticky vinyl then cut with an Exacto...

Hope this is correct place to ask as I could not find the correct place to ask. Im building a project box that has a 5 position rotary sw and maybe an 8 position switch. I have tried ebay and other sources to locate the 5 position # plate that would go on the front panel to show what # you are...

DoctorAudio Well thanks for the link and download much appreciated.

Thanks for the link I was able to get the download. One question I see there are many sounds with no name to them. Was there ever a .TXT list/file for this cd? Again thanks for the link

thanks all for the links much appreciated.

I think i have had to use microsoft edge and go through a bunch of screens until i got to the download page. downloading now thanks

Is there another way to post so i can download it??

Seems it wants me to add something to my firefox browser so not able to download this.

I know this is old but I would like a copy of the cd if possible. thanks

its down down and down for the count

I know the post is old but I do sell the Expo 100 A and S kits any combo you want and toggle or 3 position rotary sw to fit in the front fine tune location. look on facebook dj56cbsales and message me

Are you still selling the channel kits interested in one for a 959 and the 2547. thanks

Did the squeal ever get resolved know an old post but having same problems with a noise toy box that squeals with high power. plastic box 4 pin cobra mic wiring. low regular power but if an amp is used then the squeal/rf feedback. Anyone find a fix for this problem??

The channels would not change with no output because it was not on a channel.

I see mentioned many times about adding low channels to the cobra 29s with out an expo kit or xtals. Might be with the current pll on board. Would anyone have the info or directions on doing this mod for low channels. thanks

Dark star if you install the Expo kit for the 148 radio again you will only be able to tune the radio for AM channels as the xtals for the ssb channels will not tune the ssb range I went through all of this and have a post on here about tuning in for the ssb channels. I have the Expo A kits and...

yes checked out the mic contacts and all are good also cleaned them. Im sure its the element as there is not ohm readout on it. As that was a question i posted is there suppose to be some reading across the element post.

Went to fire up the turner plus 3 mic and no audio. changed the battery and the same. I removed the element and ohmed it out and nothing. Should there be some reading across the 2 terminals of the element. Has anyone replaced the element with something else as I have tried to locate an...

Just checked JP29 and it gets 8v when mic is keyed. J36 14.5 volts and when keyed jumps to 17-19 volts like it fluctuates I did change TR20 near L23 and still nothing Radio pa works great plenty of audio. Radio has plenty of up down audio loud. Rf gain works Squelch works everything works...