Search results

I have the ECO750 (can be keyed) and needs 5 watt input The ft2900e has a max output of 75 Watt but also a 5 watt output but no ptt output so the use of a footswitch Using a footswitch and the ad1-ym the ptt of the linear can be activated but i have to connect the ad1-ym with a mic (mh-48aj6)...

to connect a ft2900 (no jack) and a linear with ptt jack i will use a ft-2 footswitch ( heilsound) and a cable ad1-ym(modular) what about the mic the mic ft is mh-48aj6(1-2-3-4-5-6) (sw2-sw1-+8v-ground-mic-ptt) do i fix the mic with a rca jack or is there an adapter (modular-jack) thank you for...

dear om Which cables do i need to connect FT991 and PC to use psk31 I know there drivers to download and settings to do run HRD de luxe or a serial cable both ends rs232 or a cable one end rs232 other usb or a cable one end usb other round 6 pin or do i need them all thank you for advice and...

dear om i use the FT1200dx and scu-17 for psk31 ( hrd/comports ok) do i need to download other drivers and install other com ports when i use the ft991 thank you for advice ON3BM

dear OM I use the ft2900 e When I use the freq tx 145.600 the rx freq jumps to 145.000 also tx 145.800 rx 145.200 and all freq between 145.600 and 145.800 but using tx 145.595 no jump to 144.995 tx 145.805 no jump to 145.205 is this...

dear friends thank you for advice need some more time to see the light the eco has + and - using the arb 704 seems impossible as the eco has only a rca ptt no relay/ no alc so have to dig a bit more greetings

dear Knights of the Ham i am ready to by the ft991 ( has also a 5w output) and eco750 but 1)will the high voltage of the eco750 not blow up the tx991 relay circuit and can i use ex ARB704 2)the eco750 ( see http://www.wimo.com/amplifier-vhf-uhf_e.html) has a ptt so RCA jack I see...

to avoid complications (using ft2900) with fs-2 ( foot ptt) i will buy a ft991 so i can reduce the output 5w for the eco750 and ft991 has a ptt jack input (ptt -pa) i read about the power 48 V do i need a complementairy power supply -48v- what about the ssb /fm can i use the eco750 also for fm...

Thank you for reply and help Can i ask to the dealer footswitch if he has the cables to hook the ft2900r and the eco or is it something i have to find out and solder myself

dear om i like to operate with a eco750 pa using 48v I have a FT7900 but i think it not possible has i see no ptt on the transceiver Has Yaesu or another a tx only for the 2 meter i can use. thank you for advice

cannot download the file scu-17 usb driver virtual com driver(3.49Mb) FT1200fx perhaps server is off like to have confirmation perhaps someone will send me the file mb2963@gmail.com thank you

dear OM thank you for reply would you tell me which software do you use my mail is also to find in qrz.com on3bm

i received a lot of info to let work my ft1200dx and the interface scu-17 but i have no result so i put the scu-17 on the side who let me know he/she works with the ft1200dx to send/receive Psk31 the interface the software cables all what i need thank you for reply e-mail on on3bm qrz.com

dear members of the ham knighthood , i thank everyone who tried to help me but until now i have no result Is there anyone using the ft1200 and a scu-17 who has been able to receive and TRANSMIT psk31 and using the software ?????? I followed the instructions of the manual , installed before the...

dear om i have all cables i need to hook my tx to scu-17 and pc but how to do where to put the 3,5mm stereo audio/in out scu into the transceiver ( headphones )??? i have the cable Mdin6p - mdin6p ( rear transceiver ok ) but where in the scu -17 the end of the mbpin6p are 6 blanc wires I...

i trie to hook up a ft1200dx and a scu-17 but no result scu-17 : power ok ( usb from pc) cable (6 pin) (back tx) to input (6 pin) scu-17 like to receive and send RTTY software FL digi 3.21.83 can i have some help with the configuration com port 12 installed in the first place tx...

dear Brett Thank you for your help I tried to set.up the WInwarbler but i have problems with the zip files Do you think I can ask in Worldwide DX to send me all unziped files of Winwarbler or di I ask too much Need the advice of an OM 73 ON3BM ahasverus

dear members of the ham knighthood, as you thought i have a ft1200dx , a scu -17 usb interface i have only one problem how to hook up the hardware tx /interface which cables what software are there special things to do in order to send/receive rtty if it is possible and if not what do i have...