Search results

on3bm

dear OM and especially gary W9FNB my problem is solved with one click using the switch AUX and everything works fine have a nice day on3bm marcel

i like to thank everyone who gives me an answer to solve my problem i see i was too brief in my question so "again for me" when using the ft1200dx without ampli switched on on the 10 m band using a dipole the swr is 1.1 When switching the ampli on and the switch to 17/15 (on the ampli)as i see...

amp off gives 1 ,1 on 10 m band dipole/ft 1200dx/ amplifier on (switch 20 m) swr 1,5 switch 15/17 ) swr too high can i use the al811 xce for the 10 meter can i do something without modify inside the amp thank you for your help

problem with Al is resolved in my case the cable ct-118 was't wired in the correct way i rewired as the members told me to do i thank everyone who showed me the way best regards Ahasverus Belgium this discussion can be closed thank you

i thank everyone for this help and to let me see "the light" it must have to do with the connection cable as i heard no click from the relay i will test out what the OM told about that best regards

ft1200dx and al-811 tuning power on 1700volts (hv switch to ip position read 0) band 14mhz load 4,5 plate 8,5 switch ip switch opr tx 60w (fm) ptt transceiver send ok al 811 nothing happens led xmt don't light up what do i not see tx and al-811 hooked up with cable ct -118 thank you...

the cable ct-118 has two outputs one for the full automatic amp's the other is a cich and can be connected to the al811 (relay) i thank everyone for the help

how do hook up a ft1200dx and a Al -811 1) do i need to hook the tx and the ampli if the output tx is<70w -RELAY- 2) if yes how to do i have the cable ct-118 ( yaesu) but he only match with the ampli yaesu vl-1000 (see jpg) at the back of the al-811 the input relay needs a jack do i need to...

i try in vain to send/receive rtty i have interfaces rigblaster advantage yaesu scu-17 think to use fldigi software use windows the cables , i can make them yaesu gives me the cable ( ct packet interface) one side 6 pin other side blank (pins: tx audio/ground/ ptt/ rx date 9600...