Search results

Would that be about 10 watts PEP for ssb?

Yes it is ab1 I believe, a Magnum by Palomar. It looks alot like the Cobra xl series inside. I think I may need to drive it with less power however. Inside it has a 25 amp fuse. My feedline has a 20 amp and I blew the 20 amp last night on medium power. If my Turner mic is turned up to much it...

What would be the safe drive for a 2 mrf454 amp on ssb? My 2510 PEP is about 20 watts on side band is this to much?

Turns out the mic cable is bad, the white wire is open and the yellow seems shorted to the shield.

Yes I know that, what I was asking the parts list for the electrolytics has a code after a few of them that some of the others don't. If you look at them on the board they are a smaller package and maybe they have a different tolerance rating or something. The code is like a c-095 and c-156...

I am going to replace the electrolyte caps in my 2510. I was looking in the service manual for values and noticed some of the capacitors have a c-095 or c-156 after the value listing. I looked at some of them in the radio and they look a little different from the other caps. Anyone know what...

No the 2510 I have puts out about 20 watts pep. Looks like the amp has an issue. Even with it off I was talking on am and noticed the power dropped off to almost nothing. I thought my 2510 had an issue but I took the amp out of line and the problem went away. Must have a relay issuein the amp. I...

Looking at that web site they show the bullet proof 3 had the 2879's and the bullet proof one has the 1446. This says bullet proof one on the front plate, maybe they put the wrong front cover on or used what they had.

That is what I figured it would have is 454's. I have not seen any info on this model. It is on its way to me and I will snap a picture when I get it. I could not resist buying because I heard the magnum line was pretty much like the Cobra's.

The power supply is a mega watt switching supply. It is continuess at 30 and surge to 33. I have read good reviews about it on ham sites. The PEP I have seen at medium power is about 100 watts maybe a little less. My 2510 is putting out about 20 to 25 watts on ssb is what I usually talk on.

It is a 250. The Cobra amps are really nice I have had a xl 350 and wish I never sold it. I hope this Magmum one is just as good. That is why I bought it.

Yes I have the swr power meter after the amp. I did notice that on the low setting my power out is more stable. I wonder if the supply is having issues at the medium setting? I will probably never use anything but the medium setting and figured 30 amps would hold this just fine. I turned up the...

I guess no one has seen or used one of these amps?

I just got my bullet proof 1 amp hooked up and may have a problem. I have a hr-2510 and a Shakesspear big stick antenna. I use this on 10 meters between 28.300 and 28.500. Without the amp my swr's are 1.2 to about 1.4. With the amp they increase to about 1.6 to 1.8. Also the power seems to...

anyone know the internal wiring for a +3b. I wired it as was found on a few sites but it does not have audio. I have a 2510 and wired white to pin 1, red and shield to pin 2 and blue to pin 3. I think it may have been rewired inside. Pin 2 and 3 short when ptt depressed but 1 and 2 or connected...

Anybody familiar with a magnum by palamor. It is a gray face amp with 4 switches not the the blue face with the 4 position dial. I am wondering if it is an ab amp and 2 or 4 pill and what type are they?

He says it has 2 2879's in it. 25 watts may still be to much for them.

I ended up buying this amp and have a couple of questions. Will a stock HR 2510 over drive this amp. I will mainly be on usb. Should I turn down the alc for less output from the 2510? It says in the add it has 2879's but the only info I found shows 1446's. I know that would over drive them.

I saw that site but see no way to email or order, what's up with that?

Bullet proof is a brand name for all that think I want a amp that will not self destruct.