Search results

Ok, My conclusion: Either the spst switch is throwing it up 500hz off frequency (27.2055) upon settling, or the type/length of wire in using is causing it to settle at 27.2055 instead of 27.2050. Removed wires for switch all together, switch no longer in circuit. Took another brand new 1000uf...

EPT069610Z board.

What should the value of the added variable resistor be? Same value as the radios stock xmit frequency adjustment variable resistor? I'm assuming the same value.

I have no desire for it neither, but these locals are asking for it, so it's something I need to read up on and learn from so I can see if I can accomplish this for them.

So, if I got this right, I take a separate variable resistor and tie the flapper of said VR to the positive lead of the electrolytic cap. I then solder solder those two together to the center pin of the spst switch. I then take a wire and solder to the unused pin of the spst and run the other...

I've also noticed the receive frequency is affected when the vfo windup switch is flipped on. I then have to turn the clarifier to around 3 o'clock to tune people in on SSB, but when the switch is off everyone is basically at 12 o'clock on the clarifier. This clarifier is stock, all parts in the...

A local friend of mine paid around 1700 bucks for a Stryker 955. He said the tech decked it out with hifi xmit/receive (this info is freely available online), compressor board, echo module, xmit and receive upgrades and VFO windup. Hmmm, from what I see, compressor boards aren't that expensive...

Hi all, Got a 959 on the desk. The owner wanted a VFO windup installed, so I used a 1000uf 25v electrolytic cap. I tied the negative lead to board ground (not chassis) and the positive lead to the flapper pin of the tx frequency adjustment (VR). This radio has a stock clarifier (will not...

No more arguing for me. Stress caused one of my stints to close 100%. Not allowing myself to go through that again. Let them argue with themselves, no one around here believes a word he says anyway, everyone knows he's just an instigator that likes to get drunk and stir up arguments just for his...

Sorry to hear of your Elmer's passing doffo. Prayers are with the family and friends. Thank you all for the show of kindness and prayers. You all have always showed me support and kindness .My words of this being the best place for expert advice from kind people still stand. Thank you all...

Yes, you read that right. Sitting here in the hospital recouping after my 3rd widow maker heart attack. March 2013 - first widow maker, left me in a coma. March 2019 - second widow maker. April 2025 - third widow maker. Was arguing with the town drunk on the radio when this one happened...

Got a doosey on the desk today. It's a Galaxy Saturn (EPT360014B) 6 band. Story: Been sitting in storage for over 10 years (in a not very ventilated space). Visual Evaluation: Corrosion on SO239 connector. Rust on top cover. Operational Evaluation: Power supply cranked up to 16.65 volts DC...

I'm not going anywhere. And I agree 100% with you. I'm just taking some time to go through and reorganize all my parts and desk. It's all a mess. Have a great day.

I'm not going anywhere. Just decided not to post any longer. Seems like that one thread is now starting to bleed off into other threads I post asking for assistance, with snide remarks, as though they can't let it go as the rant it was. I did notice one major thing about the reactions from my...

Just wanted to take this time to say thank you to all that has helped me out through the past few years when I needed help. I feel the tension on this site from my recent thread of a rant. Some took it out of context, some took offense to it and some just can't let it go as just the rant that...

Thank you

Hi all, I been buying my parts in bulk orders of 30 or more of everything I need. I'm now running kinda low on 817 and 1012 regulators. I was getting them both from Digikey, but they won't sell anything less than a 300 dollar order on the 817's. Anyone know of a good source for 817 and...

I thought about throwing some fans on it, but it seems to run pretty cool without one/two. I've only had one other RFX95HD install that didn't require the fans to cool it. This thang turned out pretty nice. I did have to drop the swing back to 120w PEP so the key (carrier) would come up. Now...

Correction, After realigning it, the output is now 150w PEP swing, but only keys 7w. Any way to bring the key up in the radio a little so the amp will key about 12w? I think 7w swinging to 150w PEP may sound choppy, not sure yet cause I haven't gotten a radio check yet. Listening on my yaesu...