Search results

uh oh hes off his meds again LOL put down the pipe LOL :shock:

no modulation pot in there ??? shouldnt need to cut anything in there to get it up to snuff. im showing in the factory service manual that vr-16 is modulation.

guess it will be like joker soon but i hope not. untill then build your own. http://home.att.net/~wizardoz/cbmw/antenna_fabri.html#doit scroll down to the... Building a Vertical Gain CB Antenna a 5/8 wave antenna. not sure why I10k and maco say go with 90 degree ground plane so if...

the rating was i believe based on the coax it came with. you will be fine.

i think regardless of what freq or freqssssssss hes transmitting on. he would still come over those computer speakers at his nieghbors. just cuase hes tranmitting on multiple freqssss doesnt mean he should come over his nighbors speakers. if his nieghbors speakers were filtered and shielded...

first i would unhook all those extra grounds. (more than likely those grounds and your antenna mast are acting as part of your antenna.) then you need to isolate the antenna from your antenna mast. with a piece of wood or fibreglass. 4 foot shovel handle is what i used. then you need to get a...

ya thast what i was thinking. this could be solved maybe by a filter on his radios power lead. or rerouting his coax. "shrugs"

oh ya cuse of the gamma on the end duhhh me. well i would try to raise ir up were the botom of the elemnts are at least 15 feet off the ground. just to check that your not getting a fasle reading.

oh ok i would double check your pl-259's. i like 213. they say the lmr400 is better. so in your case it has to be either like you said the antenna is to low or bad conections on the pl-259's. ive read several places that if your beam is not above 1 wave length you will have alot of loss...

if your not running 10kw get a lower rated gamma or switdh to a beta matching system. what they ware saying is. if your trying to tune your antenna and not checking the swr at teh feedpoint of the antenna. then you need to use electrical 1/2 wave lengths of coax to get a correct reading...

time of year probly or like you said they bought them now trying to resale them.

well you dont use a mobil. so if i was you i would get the 2990 tuned, and talk back added instead of that radio. then worry about it latter on.

thats what makes me think something simple came unsoldered. well take it to either of those that you choose. ten bucks sounds ok. since if you let him fix it its taken off the total. they all do that so you dont say what is it and fix it yourself. they radio was fine before so why would it...

100.00 dollars how can anyone tell you how much when they havent seen it ? its gota be something simple. even if the final went out it shouldnt cost that much.

did you try a different mic. might just be a loose mic wire.

do you have an external meter ? give me a time and say ch 40, and we can test it or i can bring over my meter if you want. sometimes if the radio wasnt laid flat. like in its normal use position. the meter's needle will just get stuck.

i thought they were the same minus the echo. and surface mount board in the 2995dx.

sounded good the other night hope you get the talk back working and get back out there.

yep if you paid with a real visa. not a bank card visa. you can dispute the charge and get a full refund, and keep the radio. wo0t.

you do need to calibrate it first. just so you know.