• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. C

    Sams PhotoFacts Collection

    Dan, I can use the Browning Golden Eagle Mark III SSB if you have it? Andrew
  2. C

    Galaxy DX959 channel mod I believe

    I will try jumping the switches today, I’m seeing it mostly on the normal channels 1-40. Example channel 5, 20 and a few more are missing I see channel 4 twice in channel 4 position and channel 5 position. It shows 5 on the 2 digit display but shows channel 4 on the frequency display.
  3. C

    Galaxy DX959 channel mod I believe

    Ya that’s exactly how it’s wired I’m going to undo the mod to see if the channels go back to normal for 1-40. If it does maybe a bad switch they look cheap.
  4. C

    Galaxy DX959 channel mod I believe

    I had picked up a Galaxy DX959 awhile back at a hamfest that had 2 switches on the back. I finally decided to try it today and everything seems to be working kind of. I know it’s always the kind of that gets ya. The switches on the back after trying and looking up mods on cbtricks is the channel...
  5. C

    Heathkit SB-220 Linear Amplifier,

    Sell this yet?
  6. C

    Communication Power Inc FC70 need some help

    Great! Thank you
  7. C

    Communication Power Inc FC70 need some help

    My FC70 stopped showing the lower digits on the display across the board. I pulled the display board out and retouched all the solder joints but still same issue. When I power off and on the bottom digits show for a quick second but then go out. I don’t have a schematic and can’t find any docs...
  8. C

    Cobra 148 GTL power issue

    Friend dropped off his 148GTL for me to look at as he wired neg and pos backwards. I checked main fuse on the power wire and it had a 10amp blown in it!! So my first guess was D55 and I found it shorted closed not open. I replaced and still nothing but I’m seeing 12vdc everywhere in the radio...
  9. C

    IF Transformer issue

    Thanks that’s the exact circuit so 68pf it is.
  10. C

    IF Transformer issue

    I’m working on an old Eico CB that has a 1750KC IF Transformer between mixer 6U8 and 1st IF Amp 6U8 that is bad. The schematic dosen’t show the capacitance values inside the IF Transformer and I’m guessing that is what has bad on it. Eico lists it as part number 34615 With no cross reference...
  11. C

    Sams PhotoFacts Collection

    No problem but thanks for looking
  12. C

    Sams PhotoFacts Collection

    Yes
  13. C

    CB Tricks site UPDATES/THREAD MERGERS

    Where can I find the upload?
  14. C

    Sams PhotoFacts Collection

    I’m looking for the International Crystal CTZ-100 A if you have it? Andrew
  15. C

    International Crystal CTZ-100 A service manual?

    Does anyone have a copy of the SAMS for this radio. CBtricks still is down
  16. C

    Eico 772W TX issue

    I began checking voltages on the tube pins per the schematic in the SAMS guide. It was the first tube I began to test. I was getting -.5vdc and knowing a bit about tubes I knew that wasn’t enough so I followed the issue to that capacitor. It was an old color coded cap that resembled a resistor...
  17. C

    Eico 772W TX issue

    Yes I found online, saved the day for me today
  18. C

    Eico 772W TX issue

    I found it, c42 that supplies negative voltage had gone open. Now onto the alignment.
  19. C

    Eico 772W TX issue

    I picked up a near mint Eico 772W but has no TX, has ok receive. When keyed I can hear the relay slap but zero power output. I put my scope on the antenna out to see if any signal was getting past and see nothing. any suggestions were to start? I did pop the relay cover off and cleaned the...
  20. C

    Cobra 29 LTD Chrome driver & final transistor part #

    Whiteout cb tricks up I can’t find the part numbers for the driver and final transistor’s. I tried looking on then physically but nothing on them?
View older results
Top Bottom