• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. Copycat32

    CB Antenna accessory: "Zing Ring"

    Hi all I purchased a zing ring at a ham fest attached it to the base of Mt 102 whip ribg ontop of the spring. Antenna was mounted in the middle nof my trunk lid of my 66 chevell.. It seemed to help flatten swr across the band helped slightly with output and Recieve. Mada a couple after...
  2. Copycat32

    Tram 1411 Discone Antenna ground radial tuneing

    Hi group question.. I have a tram 1411 it has 2 tunable ground radials . I know normally you would tune both the same I was curious if I can tune 1 to lower frequency range and the other to a high frequency range.. Im running a yeasu FT-1000MP or a Ranger AR3500 on this antenna would...
  3. Yeast FT-1000MP keyboard pcb

    Yeast FT-1000MP keyboard pcb

    Hi all I'm looking nfor a keyboard board for a Yeasu Ft 1000mp 100watt My current one was damaged in transit due to extremly poor packing. The board is cracked right behind the VFO control.. The number on the board Is F3526101 looking for ti's board if anyone has one or knows where I can...
  4. Copycat32

    Paintinng an Antenna?

    FYI I called samurai and the basic colors even black or gray don't contain any matalic or carbon.. Only their metal flake italic paint does
  5. Copycat32

    Yeasu ft 990 deak mic

    I was. Looking at that ext power setup didn't care for it.. Was considerin wireing an Astatic 878dm to it like I did my ranger AR3500 but After a little more research I found on yeasu the the MD-1C8 mic was designed for that and a couple other radios that would have needed then...
  6. Copycat32

    Yeasu ft 990 deak mic

    Thank You
  7. Copycat32

    Yeasu ft 990 deak mic

    Hi all.. Question I just Aquired a Yeasu Ft 990 I have a M70 mic that from what I understand needs a separate power source to work dosent do anything not even key up.. but stock Mic works fine. Question is what model mic would work on its own.. Any suggestions? Comments? Thank You
  8. Copycat32

    Paintinng an Antenna?

  9. Copycat32

    Paintinng an Antenna?

    I used samurai black marine epoxy 1 paint on my maximier.. Works great.. It's uv proof and has a 10 year expectancy at harsh seae level conditions.. A friend uses rusto2 winter gray then sprayed a clear uv protection over it.. Dosent effect TX or Rx..
  10. Copycat32

    Yaesu FT1000D 11m Mod

    This will work an a ft 100mp 100 watt I'm not sure about any model extensions as I haven't purchased the radio yet
  11. Copycat32

    Tram 1499 base antenna

  12. Copycat32

    Tram 1499 base antenna

    I have a 1499.. It's ok for standard channels dosent broadband well.. Indo have a flat out across 40 channels.. Good ears but transmit is I get about 5 to 8 miles in my area .. I use it for a test antenna in my shop.. But won't run more then 50 to 60 watts through it.. .. You'll beettbto...
  13. Copycat32

    Ranger AR-3500 memory backup

    Just have to clean up the memory/frequencys buttons so I can store a couple frequencys. As of now only channel 1 and 5 work
  14. Copycat32

    Ranger AR-3500 memory backup

    Hi.. OK I found my issue.. The minii connector I pit in line so I can swap remove the battery when Changing had a bad ground condition.. Replaced it and it's working.. Might have to clean up the buttons having some issues frogrami g past memory 1.. Need to change the quiz k scan from to...
  15. Copycat32

    Ranger AR-3500 memory backup

    Ok thank you..
  16. Copycat32

    Ranger AR-3500 memory backup

    Hi nok so in tried this with a 3.7 battery back from a wireless phone and a 9 v battery.. Dosent seem to make a difference.. Neg is soldered to the ground at the edge of the pcb where bit mounts to the chassis.. And the positive at D74 as indicated in the diagram drilled a mini hole in the...
  17. Copycat32

    Ranger AR 3300 mic wiring

    The at 3500 8 pin.. Pin 8 white Pin 7 shield/blue Pin 6 red Black & yellow no connection
  18. Copycat32

    Ranger AR-3500 memory backup

    Guess I will see.. Made a couple adjustments.. Might change a couple caps.. I replaced the power cable to a heavier gage.. Have it swinging nice.. Good clear punchy audio... Nice receive.. But haven't use it long term yet.. I'll see how it works out.. Download the service manual.. To go...
  19. Copycat32

    Ranger AR-3500 memory backup

    Thank You
  20. Copycat32

    Astatic AST-878DM Base Mic

    Hi all figured out my power problem adding a condenser to this mic. Ast878dm.. Can't run it directly off the battery even though nits a ground switch.. The circuit won't shut down after you key up hence killing the battery nin a week.. Need to solder the positive lead feeding power...
Top Bottom