Search results

lol ya i hear ya 10-4 :) I am 10-6 for a while...lol damm loose jumper cable!

sweet :) and great guitar amp ...I think I will stick with my Marshal amp..lol but good to know if you want to play some leads over the air waves...lol

well they ban my listing for the RCI 2990 and it was listed as a stock 10-12 meter radio and a FCC disclaimer and now this they are sorry for there error :P 200179052153 RCI-2990 10 meter radio with FAN kit installed which had been removed by eBay. After review of this listing, we...

LMAO.. rogo on that....SWR is way low on my pic I wonder if the warranty is good on this bad meter problem pic...lol

pfft humbbug to you too...:P what IMHO <hm is he a ho? hmmmm

nanoMan jesus , whats next...lol

just to comment IN SMALL STEPS there is a difference in 1.5 or 1.1 just to clear that up IN SMALL STEPS 95% is a difference from 100%..:P

good deal Robalo, even though its a knock off of the Sigma-4 its still well built, mega years ago well when i was 25 I had one and that sigma-4 rocked, local and DX and if it don't work good, you can use it to hold tomatoes up while growing :P Wondering if thats how it got invented :P

um, a uniden 78 is a reg cb radio right? just like the 29 chassis ,if I am right...

BOOTY MONSTER it be better if you ran it with a 50-100OHM resistor or a Variable 50-100OHM pot...like you said PA and EXT speaker running to the box (build the setup in the box) just watch it when you have the speaker to close to the mic..

BOOTY MONSTER, copper is a shield and a shield for blocking many things it don't pick up this noise you refer to and is 1 hell of a RF shield but costly :P as for water pipes not a problem on the solder joints being stable there not leaking water right :P but the pvc pipe part would be a...

This mod requires NO trace cuts of the PCB ya but look at all the stuff you have to do,for parts maybe on my own radio ,but wouldn't make a living out of this..lol 148F can do the same but with its build in freq counter and trace cuts...lol not the same but easier! I am not degrading...

well we know it ain't a shack so thats not a problem ... as for the ground its like feed line up to 100 foot and then you have a loss....as I work with a lot of electricians and explained this to them and they all say the same...so shortest ground is a theory just like cutting the coax in a...

yeppers ,most of the cheaper mics if needed to be used, I place a resistor or cap in line and it cuts the audio to kill the squeal. its a ohm thing, always will be on a uni mic.. but then again all the RB units that come out peeps ground them to the mic plug instead of the radios chassis or...

roger on the fart....

after I load and then tune to max I back the load down and do a loud hum for a nice low key and a nice swing. 11 meters of course. looses around 50 watts but also doesn't fully load the amp on key-up...Just my opinion :) good luck

lol :) ok keep us posted :) damm T.V's GO cowboys wa wa packers :P

don't forget the 11 hour (standby)burn in time on new tubes :P

3-500's are 500 watts and 4-400's are 400 watts so you could weight the odds.. do you want - 200 watts or do you want 200+ watts is the 3-500's easier to find then the 4-400's or are the 4-400's easier to find then the 3-500's RFParts

here ya go :) SB200Manual