Search results

I made a few but never posted them on the proper page.. I exceeded the allowed power limit..

Local police around my parts and Sheriff's dept still use 154-159 mhz analog repeaters and car to car. ISP used to use 42mhz analog. About 15 years ago ISP along with IDOT and IDOC all jumped in bed with Motorola and they use the state wide Starcom21 system now.. I haven't seen a cb antenna on a...

26.805

You were just keeping it real.

Impressive. A lot of thought, planning and time went into that unit.

Just worked 889 Jay in the Mojave.. Big 20 over signal and great audio Jay!

Also worked 1037 northern Nevada.

Several locals running 991As.. All but one have been sent back under warranty. PA gone .. low output. Thought they fixed this with the new "A" model.. apparently not so..

I already had a monitor so I picked up a HP refurbished unit. More than what I need for the shack. I am not a gamer... It came with a corded mouse and key board Only thing I had to add was a wifi dongle. https://www.newegg.com/

Just worked 4077 Hollywood CA and a dude with no numbers on a wire in Alberta..

I would definitely try removing the power supply from the picture. Hook it up to a battery and check for the noise. If it's still present turn off ALL your breakers. If the noise dissappears..turn them on individually while checking to see when it returns. This will guide you to your source if...

The 2970 has always been the higher power version of the 2950. First generation had the orange display. Then came the 2970dx with the green display. Later came the n2 with the black display with green segments. Now they have multiple color display models.

Have had the old orange face flavors 2950s & 70s.. had an 2950dx and sold it (fail.. should've kept it) and now run a 2950cd in my pickup. They have been a solid ssb 10/11 meter rig for 25+ years. They could use a cleaner receiver and they are not screaming AM monsters stock.. but they work ok...

Heard numerous stations on 805 when the band is up..

becareless06 Last seen Mar 4, 2014

If the pole has a cutout (switch) either feeding a xformer or a line fuse don't get too radical with your hammer size and blows. If the porcelain is completely shit the vibration from your hit could cause the insulator to break and separate. This is unlikely BUT when they do the top side of the...

By law utilities are required to track down and eliminate (to the best of their ability) rf noise. I don't know who your providers are but any decent size power company should have a dude on staff trained on tracking down noise with what our guys call a "sniffer". You could go on a walk or...

A watt meter is your friend when determining drive levels..

I have been pondering picking up a 6666 for my pickup. I have been rotating between a connex 4800 ( took out for winter..drifter) and 2950 (in place now) and old TS5010. Guess it might be time to add a new flavor to the mix. I'm torn between the 6666 and a 955..

With a vertical at 40 ft I have been able to work a few hundred miles out several times on 2 meter (simplex) fm when conditions (tropo) allow for it. One morning last summer I was chatting with my locals when a station in Kansas joined in.. its happened before with Kentucky and Indiana also in...