Search results

Dead key should still be stock at around 3 I would assume.

I have the cobra 29 Ltd classic bought new in 2011. Really no mods other than vr4 maxed out and talk back with a resistor .Would love to get them talking together really well . Thanks KW

Anyone know about the tiger 200 linears ? I have one and it seems to talk best on medium side. Low and high talks ok, but best on medium. Reckon why that is ? Thanks KW PS... running a 5’ Wilson silver load antenna

Yes definately a learning curve , but very interesting stuff ...Thanks for the info . The scary thing is doing the soldering with all the close tolerances on the solder side of the board. Not much room for error. .Haha

Thanks for the thread Sonoma... that cleaned some things up. Very helpful !!

Leapfrog I’m not going to do that cap and resistor mod, but was wondering what was up with my board components being numbered and labeled different than most others I’ve seen. By the way just followed your instructions on the selector switch and all is well. I did however turn that vr4 pot out...

If you will pull the picture up you can see where jv6 is where jp36 is supposed to be. That is the same jumper, correct ?

I appreciate all of you guys help !! There is a ton of knowledge here I see.

Ok, do you have a board number? If you did your research - then you would also see a KEPC ID near the center of the board...Vietnam, Philippines' - Malaysia - no different - all are identified by this ID. Because your JP36 mod is the same across all boards that use the Cobra 29 KEPC - else you...

Thanks Leapfrog for your valuable input, I may not do the cap mod then. I'm new at this and really am interested in cb mods , but sounds like I need to cool my heels ..Lol

First of all I want to say hey , I’ve just joined up. I have a Vietnam made cobra 29 Ltd classic. Fixing to put in a cap and resistor mod and talk back with the resistor across the ext speaker and pa . I want to hook up the talk back to the channel 9 switch. it appears there are more than two...