Search results

I believe I will go with a XFORCE for the price being good,customer service and a good product.I have heard Joe does make good amps the price is quit hi for what I'am looking at and crappy customer service witch I had from that last company I purchased amps from and I will not do that again!

I have a 102" whip on top of my 1999 Suburban and ya it works ok but I hit way to many thinks so very soon I will be switching to a Wilson 5000 mag mount!

I'am in the market to get a base amp and a mobile amp.Witch of these builders would give me the best customer service,best product and best bang for the buck?

Ya I had done that all and no change.I have went threw every sanerio and came out with no good luck.Today I finally had enough and took the Imax down and the br400 coax and put back my 9 month old maco v5/8 and my rg 8u and it tured out very good ch1 1.2 ch20 1.1 and ch40 1.2 so i have full...

It turns out that it had to do with the issues I was having with my Imax and coax,all is good now!Thank you for the info.

I will give that a try and see how it goes.I would like to get it to it's sweet spot before I order my toys.Between my crappy amps look at my older posts you will under stand and the crappy soldering on all coax from sp@r#k&s I"am going nuts.

It's all wide open on the mic gain and fully keyed.It will drop if after it sits here in iddle for a few minutes and I go to key up and check things over and stay keyed for about 15 seconds and it goes from 6 watts to 5 watts with no modulation and it seems to do it sooner with each key up.

I am using a back up radio for the fun of it and while checking dead key I noticed while I set my dead key at five watts and then rechecked it after calibration I was at 6 watts and then it suddenly dropped back to 5 watts while keyed with no modulation at all.Not real sure what up?

I just cant seem to get my Imax 2000 down at a good reading on my meter,it has 75 ft of br400 and 2 6ft jumpers and 1 3ft jumper in to driver and main 4 pill with the rings all the way at the bottom.I had the ground plain kit on and it made the swr jump up about three on the meter and the...

Sorry no pics yet,maybe in the future?

I just did away with the stock coax and donut mount and put a preditor lug stud mount and put the center conducter part of the coax to the bolt at the bottom of the mount and drilled a small hole about 1" behind stud mount and put in a SS bolt and nut and that is were my sheild the the coax was...

I hooked it all up with no additional ground and all is good with the swr 1.1 to flat.I love it.

If I would have only done the same and got a better amp from a company that really cares about their customers I might of never had these issues.

He finally sent drivers... Well to I got home to see that Skywalker sent me my two drivers.One is for the 4 pill base and the other for the 4 pill mobile.they still wern't black and he didn't sent remote but really it's better than the allternative.Now that is left to do is hook them all up.Oh...

;)Thanks for the help .I finally installed this exact setup and had PERFECT swr on the setup.It really worked out to be a good clean setup but now its time to run power wires and amps.Thanks for the help.

I think talking to the BBB and spredding the word on the forum has helped out alot.Thanks for the helfull input guys.I will let you all know how it goes.:thumbup:

So I got ahold of Jack today and asked why mosfets were replaced by sky 4 and was told they were weak and lots of problems so he was trying a beafier style and will take a couple months to see if their good enought,I proceeded to tell him who I was and he paused and I asked him so what were you...

I told him to send me what i orderd witch was a Mosfet 900 base and Mosfet 900 mobile and and remote and have everything it shows in the picture on his web page because I had tried to get a full refund and he said no in so many words thats why I got real vocal with him.I tald him I want this...

ya so i gave it 30 days to let the BBB do their thing and than a week ago I deciced to call Jack back and he finally answerd and I REALLY let my frustrations out on him since I couln't get ahold of him on the phone for 3 months.So we disputted it back and forth and he to say the least he asked...

I will finally be seting up my mobile setup and I wiil have a 102" ss whip on a 4" ss hustler spring connected to a Preditor lug style stud mount.I will be replacing coax with the BR 240 double sheild coax and stud mount and i will have positive part of coax to the stud and the sheilding to a...