Search results

Here is the fix that Connex sent to their distributors: Problem Echo can not be adjusted because the IC gain is too high Solution Change R11 from 10K to 12K you may also try a 15K You might want to give this a try before you spend extra money changing out the echo board.

There is a fix available for this radio. If I recall it's simply a matter of changing one resistor. I'll try and find it in the morning.

A red light from the meter is normal on transmit, a flashing red light indicates a problem.

Yes DTB and 8541 are very good, otherwise our warranty repair center can help you out.

Try this link forum.worldwidedx.com/viewtopic.php?t=16316

All of the above are great techs!

Nice one Dave! I'll try and get a solid date from the manufacturer.

Hello everyone, Below is Justin's recommended receiver alignment procedure. You'll notice he says to turn L3 and L4 1/3 to the right or until the noise floor decreases. This is very similar to what Galaxy has recommended with their newer radios. If the information below is not formatted...

The last I've heard on the SSB Stryker is they finished the main circuit board design, yes it will use a new board. The SSB Stryker, not the SR-440HP

The last I've heard on the SSB Stryker is they finished the main circuit board design, yes it will use a new board.

No problem Boomer! I didn't mean to upset you by having a mod edit the post, I just wanted to make sure I was quoted correctly regarding the phone conversation I had with Bill. Thanks again and have a Merry Christmas!

Hello Boomer, Yes the production date for the SR-490HP is January 7th 2007. If they ship on time we will seem them on February or March. Actually the radio that was sent in by your friend was not hacked up. All limiters were in place and functioning correctly. No shop is perfect and I...

Hello, Please refresh my memory regarding what other information was needed for your project. Thank you

I'm sorry, but I was waiting for you to let us know how it turned out. I assumed from your post you had it figured out. Please let us know if you didn't we're here to support our product.

DTB comes highly recommended! I've yet to hear of any who isn't satisfied with his work.

No, this radio is AM/FM only.

Boomer, let us know if your friend is still having problems with the radio.

Hello, Below is a link to the echo board schematic: http://www.strykerradios.com/stryker_sr440_echo_sch.pdf You will see audio output from the echo board (J1) has a jumper going from it to the radios main circuit board J122 If I recall correctly the on/off control knob is connected...

Hello, Yes the Ranger counter will work. It's the same connector.

It's great to see some fans on here. Matt Hughes is a great fighter.