Search results

wish i knew the trick to finding caps on the solder side of the board..lol

TY Nomad for your response, I will try just that.

i have this same problem but it is ONLY ON am ALL OTHER MODES VOLUME IS NORMAL, IS THIS THE SAME FIX ?

i realize this thread is super old but i have a radio where they removed the delta tune and soldered all 3 wires together, it sounds like my rx is off because of this, i do not have a delta tune pot at all, how can i fix this issue ? should all 3 wires be joined to give "center slot" it sure...

i found these but don't know if they would work out https://www.cometpinball.com/products/star-post-lights

if indeed we could locate a source what is the size we would require for a typical mobile radio 10mm ?

Whatever happened ?

awe sorry to hear that about him, i also have some behringer rack gear, not sure on that stuff either..lol - dsp1124p feedback destroyer - virtualizer pro dsp2024p - composer pro xl - ultragain preamp

btw i clicked the link for Fortymobile and got nothing.

old topic i know but relevant to my question, I am also looking for setup/info on using protools for radio use, I have protools8/mbox/re20 mic and using a stryker955 with asymod board, anyone have any info and experiance using protools that can get me started ? thnks

old post but simple answer, press F key, rotate mem/vfo channel till you see DISP in window, press it to toggle large or small

ever get it working i have one with the same exact issue

no issues This is an old thread, I just bought a 257hp blue readout model that has the rfx75 from the factory, this radio is great, I have zero issues with it and would gladly buy 20 more. btw i sold my omegaforce and replaced it with the 257hp, the 257hp sounds and puts out every bit as...

i prefer the browning 776, the browning banana mic and unamplified d104 for all my brownings, i have the mkIII,IVA and the Eagle R27/S23 However, i recently picked up an old Stromberg Carlson MD30C High impedance head "looks like the astatic 10DA head" and popped it on a astatic unamplified G...

I just received my s45hp and yes while the jumper pins are gone the switching diode between con1 and con3 was fine, i simply bridged con3 with solder and i get full coverage from 25.165 - 29.699 MHz