Search results

I already figured out that when I solder the two hot together and the two ground together and unsolder the one yellow wire that I have normal 40 channel. I was planning on enabling talkback through the channell 9 switch. I didn't know if I could run 2 wires in to enable talkback and two wires...

Anybody know what the 6 pins on a cobra 29 ltd ch.9 switch do? I know 2 are ground, 2 are hot and the yellow activates ch.9. I'm just wondering if there is like an input and output with the 6 pins. Like power comes in top 2 pins and out bottomed 2 pins. Basically what are the 6 pins for? Thanks

Alright good info. I will check out the flukes. I was thinking of using a 10. Crystal to keep the counter on point. Thanks

Yeah 10-4. You think that one will do?

Can anybody recommend a good frequency counter to align a radio. Will this one do tekpower TP3165? Thanks

10-4 did not know that, thank you!

Hey Rob, I heard you might know where the tuning locations are on a galaxy dx 99v2. Is it the same as the 98hp? Thanks

Can anybody be so kind and tell me where the driver is located on a cobra 29 ltd??? Thanks i appreciate it!

Yeah I know it's the same chassis as the 98 but I'm not sure if the tuning pots are the same. Thanks for the info. I will pop the lid and hopefully they are labeled.

So there is no info on where the different pots are to turn up or down am power, sideband power, alc and so on for the relatively new galaxy dx 99v2. There is info for the discontinued 99v but not the 99v2. Anybody know the tuning spots on the galaxy dx 99v2? Maybe vr14????

Right on! That must have been some primitive equipment to wire line back in 70s. Lol yeah nothing like working up in the derricks for weeks on end.... gets pretty lonely. But I haven't decided what I'm going to do with the scope yet, I'm just going to forget about it for a few days. That would...

Yeah I learned a lot throughout this saga. Thanks to everyone for their input! I'm just a dumb ass oil rigger with a new cb radio hobby.

Yeah no worries, I bought the scope for shits and giggles and to learn something new... I have no problems using it for target practise. Maybe your right, I should stick to my day job instead of geeking out on a scope.

There is continuity between ground pin and chassis. I get the same reading on the volt meter from wall ground to chassis and wall neutral to chassis reading .675 ac volts. Then if I turn on my power supply and plug in scope: I touch negative terminal on power supply and positive on chassis of...

Check for continuity between ground pin on scopes power cord??

10-4. The radio didn't have a burnt trace before I hooked it up to the scope. The first time I hooked it up to the scope the radio didn't turn on.... I looked and it burned the trace. I repaired the trace with solder, powered up the radio without the scope and it worked fine. Hooked it up to the...

10-4 roger that. I got a really nice paper weight now.

AC*

Three pin cord

The 24 dc volt is on any non painted metal like the carry handle and metal knobs and what now. And actually is fluctuating 36 volts.