Search results

My L6 lightning quad is mounted on a hazer with non conductive wheels. How critical is it to have a direct ground connection to the boom?

Roger that.

Thanks Linearone. I’m going to need like 4 of these to power my amp. $520 for the megawatt is a bit high. Mouser sells the mean well for about $60. Mouser is a vary well known supplier. https://www.mouser.com/ProductDetail/MEAN-WELL/LRS-600-12?qs=Znm5pLBrcAKdbBr%2FwUxVsA%3D%3D I guess I’ll...

https://www.worldwidedx.com/threads/voltage-drop-with-power-supply-when-in-use-problem.269429/#post-852507. This is the thread I read. Linearone recommend a mean well or a Megawatt. This is thread that got me researching the Mean Well. I was hoping someone would read my post that had owned a...

I read one thread on here which lead me to mean well. Not sure which thread I found it on. I’ll try to find it. I think the Chinese knock offs are poor copies of the mean well supply. The link talks about this. I will try to find the thread I read it on...

Thanks for the information.

I have a amp to power. Does the Mean Well LRS-600-12 cause any receive interference?

Anyone know much about a Sark 100? I have one that shows a output frequency 40.010 when it is actually 27.205. If anyone knows how to correct this I’d like to know.

Replaced all those 1/4 wave jumpers to my shorter jumpers. Has no effect on SWR now. Can’t thank yall enough for the help and kind words. 73’s cheers!!

Got my chokes built and installed. 1.1 on ch1 1.25 ch40. Tuned it about 10 ft off the ground. Before the chokes just raising it to the 40ft height would make a huge difference in SWR. Now it’s the same at any height. I haven’t tried the shorter jumpers yet but I suspect it will be fine now...

https://stetsomstore.com/products/stetsom-bravo-charger-200a-power-supply-smart-pro Any one ever use one of these? They claim they work with out the need for batteries. And without interference to receive.

2 Quick question for the group. 1: Is there a way to check for unwanted RF on a coax shield? 2: Will placing clip on ferrite beads at the meter show a response on the SWR meter if there is?

Awesome. Thanks Michael. I have a local giga parts not too far from where I work . Going to head over there after work tomorrow and pick up 213. Still have to figure out a power supply for my main amp. Working 6 10 he shifts leaves little time to experiment. But I’ll update results when I can.

Anyone have a 3D printer program to print a core for an ugly balun? I have a close friend that can print a couple.

Looks great. Thanks.

Horizontal is lower. 1.5 vertical 1.8 .

All things out of the equation. If you seen SWR change with coax length in your shack. What would be your first thought to check? And try?Again thanks for your input.

Thanks for trying to help me out here. I love the hobby!

Its a little better at 2 watt, with radio only.