Search results

Lester is over charging for someone else’s design. I made my boards for a fraction of that price and it’s all surface mount. Only thing I left out was the relay, it is only there to bypass the SP1A.

man

Mrf454, SD1446, 2SC2290

There’s a technical bulletin regarding that. It’s a known issue

Works really good

Buy polarized screen and turn it 90 degrees. Did it on my 2510

Yes similar to those

I remember working on a Telestat that used the Cybernet VCO section that had that crappy epoxy encased part. The symptoms the OP mentioned reminded me of that exact problem the Telestat had.Razor radio made a replacement part for that epoxy encased part

I’m not familiar with this radio but does it share any Cybernet board qualities?

Yours came prescratched too!

At that price, it’s a steal!!

Where Guess its another one I gotta make my own.

Came prescratched

If you watch the scope closely with the different carrier/NPC schemes, you can see where the action is. The MD-1 will vary the carrier at an audio rate similar to the regular NPC “galaxy” mod. When you couple the scope signal in, leave the coupling in DC. You’ll see the DC portion of the carrier...

I got one to see what it does and how.

SP1-a Gonna have to build me a PA0FRI. Seen a Joachim RF clipper of a similar layout .

Same guy that made the galaxy pill board. Xbones

Looked at the 5555 schematic and compared to my Lincoln 2 . Also compared a blurry copy of the 6666, they are all the same. I modded my Lincoln 2 hifi front to back TX and RX. Left a copy over at GF site of my mods but I missed the portion between the front jack and the first mic preamp.

MMM hifireceive mod is fine, the other TX mods works also. I normally do audio widening on all my radios.