Search results

Direct Message sent Ready to go

Go it receive is low, and the meter is not working in receive. The meter works for SWR and transmission.. I'm hooked. Bought another one just now and will be receiving it in about a week. I ordered the parts for the receiver of the first one. Now to work on the DDS

Got one, waiting on delivery. Does anyone have the Service Manual? I'm searching for how to hook up a VFO to it now.

Using the 5351 chip & Nano.

I know this is an Old Post. I'm in the market for an SBE Console II 23-channel radio for developing a DDS-VFO for it. I make DDS-VFO's for the Browning Mark III, SSB-15, and Sonar FS 23 and 3023. I see them on ebay for around $100.

this is a really old post Did you ever find a dds-vfo for your sonar FS-23?

Variable, let's try this with the proper spelling. Could not figure out how to edit

I went with Hammer Jockey. Excellent Built 2 MRF454 with SSB Bias and Veraiable. I get 160 out

Yes, the main radio is a Flex 50000a putting out 65 watts. Then I would need a driver once I finish the restoration of the Browning Golden Eagle Mark III, which puts out about 10 watts. Then I would need one. I don't want to drive the box hard. The previous owner didn't, I asked this question...

I'm Looking to buy a driver at least 100 Watt out PEP, for a 6 Pill. It must have an SSB delay. Mitch

I already tried that. I just tried it again checked the box saved the profile shut the software off, and turned it back on. I modulated into the mic. still goes negative on peaks.

Sorry, I Thought I replied. Yes Phase Invert is unchecked in the setting of the Flex 5000a software. O I did reply, it's above. I did check, it and had the same problem. I even called MFJ The same the wires for the meter are wired backward. HAHAHAHA. Got the email They asked what band is it...

After my reply I had a chance to get on the radio and ask around. 2 other people have the same problem.

Not sure what you mean. I have a Flex 5000a with a Studio Phantom Powered mic attached to the front of the radio and made sure Phase Invert was unchecked. (pic attached)

Thank You I have given up on it. and Its amazing that MFJ would say the wires are backwards did you check it? and if they are not then the diode's backward LOL

I sent the picture to MFJ he said the wiring is correct.

I called MFJ. He said the wiring must be backwards. I said it's not I checked. He goes how did you check. I said I made sure the transmitter coax was going to the transmitter input and the antennas were going to the 2 antennas. He said No inside the radio. He goes if the wires are correct then...

Mic Phase Inverted is unchecked

Peak hold is ON

I have an MFJ-998 Intellituner and any power shows downward power as I modulate. But on my CN-801 Daiwa on AVG it shows upwards. The Daiwa is after the antenna tuner and before the antenna. I have changed different lengths of the Coax—good 213.