Search results

My remotesystem is workink and the RX is OK (Thanks fourstring) Can I have some help with the TX (PTT) FT1200dx/ Footswitch usb/hrd/ scu-17/REmAud/ I have the Mic cable (ft) one end blanc and know the funtions of the Pins(mic) How do I hook the Laptop ( remote client ) to the server / the...

I thank everybody who gives some help Finaly I "saw the light" System is working 73 ON3BM

I Thank everybody who gives some help Finaly I "saw the light" system is working 73

dear Administrator I thank you for your reply I have to look for the way to connect the pc (server) to the rig (audio) interface ? I connected the pc to the rig using scu-17 So I have to verify if the scu has a soundcard Of course if the rig don't send audio to the sever i will hear only noice...

Dear Knights ON3BM Remote and Audio Using w7/ft1200dx/scu-17/ PC (remote sever) - laptop (client) pc connected to scu (usb) scu connect to rig (data cable) cable serial PTT No problem to connect laptop and pc using HRD 6.3 Problem : AUDIO installed RemAud on pc and on laptop with same...

my "home" pc talks to the "remote" pc remote is ft1200dx , hrd 6.3.0 and interface scu-17 for psk using the home pc i have no USB Audio codec ( sofware/scu-17 create enhanced/ basic virt.com ports) as scu-17 is connected to the remote do i need a second scu-17 to connect to the home pc to have...

I have the ECO750 (can be keyed) and needs 5 watt input The ft2900e has a max output of 75 Watt but also a 5 watt output but no ptt output so the use of a footswitch Using a footswitch and the ad1-ym the ptt of the linear can be activated but i have to connect the ad1-ym with a mic (mh-48aj6)...

to connect a ft2900 (no jack) and a linear with ptt jack i will use a ft-2 footswitch ( heilsound) and a cable ad1-ym(modular) what about the mic the mic ft is mh-48aj6(1-2-3-4-5-6) (sw2-sw1-+8v-ground-mic-ptt) do i fix the mic with a rca jack or is there an adapter (modular-jack) thank you for...

dear om Which cables do i need to connect FT991 and PC to use psk31 I know there drivers to download and settings to do run HRD de luxe or a serial cable both ends rs232 or a cable one end rs232 other usb or a cable one end usb other round 6 pin or do i need them all thank you for advice and...

dear om i use the FT1200dx and scu-17 for psk31 ( hrd/comports ok) do i need to download other drivers and install other com ports when i use the ft991 thank you for advice ON3BM

dear OM I use the ft2900 e When I use the freq tx 145.600 the rx freq jumps to 145.000 also tx 145.800 rx 145.200 and all freq between 145.600 and 145.800 but using tx 145.595 no jump to 144.995 tx 145.805 no jump to 145.205 is this...

dear friends thank you for advice need some more time to see the light the eco has + and - using the arb 704 seems impossible as the eco has only a rca ptt no relay/ no alc so have to dig a bit more greetings

dear Knights of the Ham i am ready to by the ft991 ( has also a 5w output) and eco750 but 1)will the high voltage of the eco750 not blow up the tx991 relay circuit and can i use ex ARB704 2)the eco750 ( see http://www.wimo.com/amplifier-vhf-uhf_e.html) has a ptt so RCA jack I see...

to avoid complications (using ft2900) with fs-2 ( foot ptt) i will buy a ft991 so i can reduce the output 5w for the eco750 and ft991 has a ptt jack input (ptt -pa) i read about the power 48 V do i need a complementairy power supply -48v- what about the ssb /fm can i use the eco750 also for fm...

Thank you for reply and help Can i ask to the dealer footswitch if he has the cables to hook the ft2900r and the eco or is it something i have to find out and solder myself

dear om i like to operate with a eco750 pa using 48v I have a FT7900 but i think it not possible has i see no ptt on the transceiver Has Yaesu or another a tx only for the 2 meter i can use. thank you for advice

cannot download the file scu-17 usb driver virtual com driver(3.49Mb) FT1200fx perhaps server is off like to have confirmation perhaps someone will send me the file mb2963@gmail.com thank you