Search results

I have both mics. The super sidekick is a good sounding mic, but to me the Plus 3 is way better sounding. I had a plus 3 that was cosmetically pretty bad so I took the guts and put it in my super sidekick. So not only does it look great but also sounds great. And I mostly use it for SSB.

OK I replaced the zener with a 7805 regulator. Nothing changed. Now Im really stuck. But I did see a company with replacement boards. Will check that out asap.

Thank you sir. Im on it.

Found some things on Secret CB #26 Im going thru now too.

My prized Galaxy 2100 frequency counter went out. Radio works fine though. I replaced all electrolytics, even scraped out the dried up glue. The rest of the radio also had all the electrolytics replaced. Freq counter board # EPT210010A. Radio stamped Taiwan. On the counter board, 3.2768mhz xtal...

Using a DVM you can check continuity on the switch poles. Ive had many switches badly oxidized, and using contact cleaner, it actually took several minutes flipping the switch back and forth til it cleaned up internally and started working. Maybe this might help you.

Maybe doing a continuity check on the mic audio line and ground line, with the mic open and the radio open, checking from the mic, thru the mic connector, into the radio for continuity. Ive experienced poor or no connections thru mic connectors before (even antenna connectors).

Brown green brown is 150 ohms.

Yes, the D201A is a non-PLL radio. The channel switch is known to fail. Not IF but WHEN. It mixes 5 crystals with 10 other crystals to get the total 40. So the channel switch has a very different switching matrix then a 40 channel PLL radio. Was hoping there was maybe a few other radios like...

Appreciate the response. The Tram D201A had this setup. was hoping it wasn't the only radio like this. We all know how the channel switch fails in these radios.

I know most 40 channel radios are PLL, but are there any non-PLL radios (crystal synthesis) out there? If there is I want to try retro the switch into my Tram D201A. TIA.

Thats it. I didn't try it. I just removed it. Searched the internet but found no info at all. Can only assume it adds FM mode to the radio. If any info on it comes about, I wouldnt mind trying it.

This one just hit me. Live Free or Die Hard, Bruce is driving a semi and talking on a scanner, and on 66.6 mhz to Warlock, the computer hacker king. I called the network to complain but they blocked my number.

Thank you my brother!

Many years back, my boss went on a DXpedition in the pacific. Cant fully remember where. Kure, Kingman? Sorry just dont remember. But it was rare, and there was a planet pileup. Well, I was at work getting ready for an upcoming job. Needed the Boss' hammer drill. The prep meeting at work...

Hi. I recently found and bought a Scooper M-8080 which looks to be almost 99% identical to the Utac TRX-500. Only difference is the M-8080 has 2 banks of channels, CB and HI, the Utac just has a delta tune switch. Would you have Sams CB-181? I read that the Utac TRX-500 is in there. Thank you. Gman

Just a thought....... Are there other mods that need to be undone? Able to verify present wiring matches stock wiring via schematic?

Just very glad to help.

No. Gears must be on. But I think that shaft for the gear should be turning. At 62 my vision so-so. Maybe can feel the shaft spinning with your finger if you cant see it.