Search results

Ok ya those are nice radios and kinda rare dont see many of them around

If you need I can send you a 40+ and 40- crystal no charge if you want to add extra channels

I just sent a email to them to get a price on the 10.0525 @ 10 pieces

Did you try to re attach the pin/wire

company i bought from in China has a minimum of 600 per frequency. They will do samples but try Kens and if not try Bomar crystals the lady that runs the place hit me one tome for about $5000.00 for xtals about 5 years ago for about a few hundred xtals so I canceled when I saw the quote and...

what happened to the crystal, did a pin break???

https://www.bomarcrystal.com/

Its Bomar crystal in Middlesex N.J What happened to the crystal????

10.070-10.0525=.0175 which should be able to bend with a trim cap

Is the xtal needed for a 02a chassis what model radio

The xtals I got I was able to trim a full channel with a 40pf yellow trim cam. Here is the specs I had the xtals made not many companies here in states that will cut xtals I think There is 1 in New Jersey they want $60 minimum for 1 crystal

Did u try Kens electronics he shows a 10.040 and a 10.070 you might be able to use a trim cap with it.

Kit is relay switching with no crystal drifting I use this kit also for my mb8719/8734 like the cobra 2000, 148s, washingtons, grants. madisons and more. The 02a kits will work on the Cybernet PLL02A Chassis-Based CB RadiosClassic vintage 40-channel SSB transceivers utilizing this specific...

Yes I did get my xtals I installed in my kit boards and works great 27.415 - 27.855 and 26.955-26.515 just remove the main xtal 10.0525 install on kit board and trim the caps align radio and all set. Can also do the pin 15 mod for the missed A channels and also any missed on the new bands. kit...

Well i found a way to get the low channels with the pll02a. 1 mod gives 25.685-26.125 1 mod gives 26.325-26.765 1 mod gives 26.645-26.955 this is all u need for the lower channels can also get the high channels ch 42 -104 so 1 switch for 42-60 1 sw to 60-104 1 sw for the low channels 3...

Thanks cableguy> the vco is locking the full up/down band its the power and i did check the link u posted. I will have to check the 2 T4 and T5 both 27mhz transformers and see how they are wired in circuit. The upd 858 uses the same mod where u cut a trace and jump to the unused pins. Then...

On these pll02a chassis doing the channel mod to go up/down they dont broadband power wise that good the chassis that have the 10.0525 mixer xtal. Power drops off pretty fast. Channel lock from 27.855 down to 26.515 but again little power at both ends. Has anyone have any tricks on tuning for...

Did you ever get the low channels on an 02A PLL SSB RADIO?

u still in the group and do u still have the telstat 140 for parts?

So hoping it will hold out with just bridiging with resistors