You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
One other tidbit: the 27 Ohm resistor before T1 has been non-existent. I tried adding it back in but the amp would not work at all so I took it back out.
The radio is a General AP Hill keying 3 Watts. I removed a mod to the limiter that was causing it to overmodulate. Attached is the barefoot signal. If I modulate it to 100% then the output of the amp will be overmodulated.
I'm trying to figure out why my positive peaks are higher than my negative peaks (see photo) and how to fix this. It's a Black Cat HD300 with 2X SD1446. Appears to be the same schematic as a Palomar Blue Lightning. Thanks in advance for the help.
I was comparing the schematics of the EPT360014B and C, and noticed that the mixer changed from TDA6130 to SM6130. Comparing the TDA6130 pinouts to the EPT360014B schematic, it seems like the C schematic correlates better to the TDA6130, for example: on the B schematic, the tap on the...
Slim pickens today
CH 20
13, MS
CH 21
COJACK, LA
Too much noise on the band. I'm very upset with the locals on the superbowl bleeding over onto all 40. Very unprofessional.
CH 20
LITTLE MAN, OH
68, OH
51, VA
CHOKECHAIN, GA
CH 21
327, OH
CH 22
55, BLUE RIDGE MOUNTAINS
CH 23
225 RAJUN CAJUN, LA
CH 24
150, MI
702, OH
CH 32
69, IN
662, MAGNOLIA
SNOOP DOG, PA
671 SOUTHERN CAL WAVIN' A HAND
THANKS TO ALL
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.