Search results

sorry i mean how big of a power supply to power the at-6666

So how many amps to run at-6666 barefoot

MARCONI i never seen the coil only just read the specs. transformer wire 22 gauge times 21 times on 1/4'' dowel now it was a usa site so i gather that it's usa gauge wire and i did look up usa wire gauge and there is more than 1 gauge system . so in the end i turned 21 turns what i...

HI MARCONI all i can tell you it was for 102 inch antenna on 11 meter band. I will try mogvz surgestion 0f using the coax it self as a rf choke 5.6 ft from antenna and 5 turns around 4.25 inch pvc pipe. this will have to wait till after my work . so all surgestions are wecome in the...

OK thanks for the photo. Will that work on 27mhz

MOGVZ Thank you for you time and help with that info. I will try that on my next day off

IS that a mobile 27mhz ground plan. who makes it and how big is it. does it work

I read some where make a coil out of 22 gauge wire wraped 21 time around 1/4 '' pvc pipe and put it in serious at feed point and other end to a ground to help tune the antenna. but this does not mean much to me!!!. can some one put up a diagram in very simple terms as am new to all this .

Ok I'm Looking at a 102'' antenna and mount it to my tow bar and see how that works. it will take a while to come from the USA to Australia. I havent order it yet. what a good 102'' brand antenna ???. thanks. john

Hi all can FT-7 be fitted with a 27mhz crystal and is there a video how to do or a step by step instuctions on how to do. thanks . John

Are base load antennas same as ground INDEPENTENT antennas

Thanks for the info but i think a ground INDEPENDENT antenna best way out for me

HI all i'm wanting a 27 mhz ground Indepenendent antenna as i can't get enough good metal ground plan on my ute and getting bad swr . have looked on USA ebay and can't find them would have thought there would be lots as usa still uses 27mhz alot on there trucks that are fiber glass cabs...

Thanks Mate for the info and others for all you help. john

Think i be only running amp on lower setting at 150 watts on ssb and some times am. an not sure what you mean by CAN not have 2 watts in and have it swing to 30watts ???

Ok when you say low drive amplifier i gather thats a low watts input to the KLB-240. any idear how low is safe. So it does have variable control that can be ajusted at face panel controls. thank for you reply. john

Hi all am looking at buying a Anytone at-6666 have read good things mostly but have read they can blow the finals as from too many amps !!!. So can the amps be turned down from the front panel controls. OR turn down to run a linear amp to take the load of the radio finals. IF i run...

Does any one know if you can buy a Anytone at-6666 that is 27mhz out of the box or some sells them with 27mhz modified. thanks

What do you think of this 60 amp power supply