• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. 3006

    Need help!!!

    I got the noise deal fixed had to make a choke I got a 120 amp alternator now but not doing good on the battery situation 120 amps be enough?
  2. 3006

    Need help!!!

    On another note once I drill the hole will I have any issues running my messenger 9 pill it's 1446 transistors wondering if I need to worry about computer in truck or not?
  3. 3006

    Need help!!!

    Occasionally when taking off from a light it will look like someone keyed up to then drop down to 1 s unit until I get to cruising speed I ordered ferrite beads and 0.1 if caps so see if I can make something happen gonna move my coax so it's not ran along the floor on the side the fuel pumps on
  4. 3006

    Need help!!!

    Will also get the alternator rebuilt in near future being as it has 250000 on it.as for smdrilling the hole working rotating swing shift right now so times a factor want to get the ball mount on before spring so I can install my messenger m4v!
  5. 3006

    Need help!!!

    Well today I walked around the truck with a handheld radio was quiet everywhere near the alternator interior etc until I got to the back of the fuel tank then the radio went nuts probably 9 s units of noise so I suppose I'll put a cap on it and a ferrite choke and take it from there.
  6. 3006

    Need help!!!

    I'll give the ferrite choke a shot never made one before I appreciate all the help will let yas know what happens lol.
  7. 3006

    Need help!!!

    i have a 95 explorer and my new mobile.i transferred everything over from my old van and now I have 9 s units of noise while driving.sitting at a idle radio is quiet as can be.a little background on my rig I got a galaxy dx959 lightly modded Wilson 5000 antenna on a magnet mount base..."no time...
  8. 3006

    Galaxy DX 66v swing mod

    I appreciate all the info I'm gonna get to work on it this weekend (waiting on new mic pcb) really wanting to avoid having that splatter box radio I have a feeling this radio has seen a many of truck stops I'm just assuming it's a splatter box.I always get compliments from truckers on 19 but...
  9. 3006

    Galaxy DX 66v swing mod

    I have a galaxy dx66v has been converted to mosfet.now on my cheap Palomar meter I can set dead key as low as 1watt high as ten watts and swing 35 watts so I assume it has a swing mod I don't want this swing mod I do not believe I enjoy the higher wattage but want durability loud but no...
  10. 3006

    Messanger m4v

    Well I have come to realize I should probably put this amp in my mobile I have a 04 Pontiac Montana my only issue is I'm limited to a magnet mount I have a Wilson 2000 trucker antenna with a magnetic base mount standing wave is less than 1.5 is this a Terrible idea I'd drill the hole but next...
  11. 3006

    Messanger m4v

    I appreciate all the good info I'm gonna order a power supply from smokin Joe in a week or so I really don't want anything going boom in the radio shack!
  12. 3006

    Messanger m4v

    That's kinda what I was thinking I'm running g a varmint xl-150 now don't quite have the giddy up the messenger has.still pretty new to the radio world so I appreciate all advice
  13. 3006

    Messanger m4v

    Can I use a 800 CCA battery and 10 amp charger running to use this amp to broke for power supply with Christmas and all have had amp for almost a year dying to use it.
  14. 3006

    Hifi

    I think I'm gonna do it with the 66 you can't run hi-fi on sideband correct?
  15. 3006

    Hifi

    That was all useful information I'm afraid the 66 has been swing modded not certain but more than likely it was bought used I could undo the swing kit and I can solder so it seems fairly straight forward as for the PC sound card I got an older PC with a sound blaster live in would that do the trick
  16. 3006

    Hifi

    This may have been posted before am new to hi-fi audio.i have a cobra 29gtl and a galaxy dx959 completely stock then a galaxy dx66v with MOSFET 10 watts swinging 35 not bird.. too poor for that I'm trying g to figure out which radio to use and if I should direct inject or not and as far as...