Search results

Looking at Hantek pc scopes on amazon is their a particular one?

I belive from the specs this one is 0-200khz but i dont see the MHZ listing Specifications: DSO138 Kit Type: NOT Soldered DIY Kit / SMD Soldered Kit (Optional) Maximum Real-time Sampling Rate: 1Msps Accuracy: 12Bit Sampling Buffer Depth: 1024 bytes Analog Bandwidth: 0-200KHz Vertical...

Ok I am completely new to using a scope so bear with me. I ran across this and thought it would 1. be cool to build 2. A great learning project 3. If it would let me look at the wave form after turning up modulation on a cb it would get me started. Now that being said would it work for entry...

Thank you i imagine little has changed God knows I have LOL

thank you

Thanks sunbulls I have been reading and leaning that way possibly a 203. I am researching info now on the 29lx to do a variable dead key mod so i can run an amp and still talk bearfoot.

Ok It is mounted near the top of the ladder I positioned it to keep it at 13 ft from the ground since most clearance is 13ft 6in or higher (keeping a wrench handy to remove if needed for low clearance) I dont know the swr yet I am waiting for my cable to be delivered so its not fully installed...

Thank you

thank you

It is mounted to a plate on the ladder. I checked for continuity between the ladder and the chassis to confirm it is attached to the metal frame. As an added measure I have run a 10awg wire from the antenna mount to the RV chassis on the same ground area as the CB itself. Is this correct or am I...

Thank you PA770

Hello everyone its been 25+ years since I picked up a cb/amateur mic. My last set up was a Cobra 29 LTD classic with a TX250 and single 4 ft firestik. Fast forward through 26 years in the emergency services and its time to retire and hit the road. I picked up a Cobra 29lx that has been peaked...