• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

10 pill build

ShadowDelaware

Well-Known Member
Jun 20, 2023
219
161
53
47
South jersey, North Delaware
udxcbradio.com
I am putting together a 10x mrf421 this is the 3rd one of these I have done but decided to ask for suggestions on power wire. The first one I built, I did two strands of 6 gauge for the power.The second one that I built, I did one piece of 0 wire. They both worked like a charm but this time, I cant decide if I want to take it to 3 pieces of six wire or use 1 piece of 0 again. What are your suggestions. Obviously using one piece of 0 books a lot cleaner.
But what do we care about the looks if it's going to work better another way....
 
  • Like
Reactions: Shadetree Mechanic

I am putting together a 10x mrf421 this is the 3rd one of these I have done but decided to ask for suggestions on power wire. The first one I built, I did two strands of 6 gauge for the power.The second one that I built, I did one piece of 0 wire. They both worked like a charm but this time, I cant decide if I want to take it to 3 pieces of six wire or use 1 piece of 0 again. What are your suggestions. Obviously using one piece of 0 books a lot cleaner.
But what do we care about the looks if it's going to work better another way....
Mobeeeel or base unit?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.