Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

102" install

I was planning on using it on 10m-11m. The reason the 144Mhz is there is to show the SWR reading at that frequency as opposed to the 10 and 11 meter freq. swr SEEMS TO BE LOWER AT THE 2M FREQ


144.50 Mhz(freq)-5.5(SWR)@50 Ohms(Ohms at that freq.)
27.250 Mhz- 12.0(SWR)@50 Ohms
28.400 Mhz-14.0(SWR) @100 Ohms
 
whip has been taken off and placed to the side for now. Replaced with a Wilson for convenience sake. That's all for your replies and will pick this up again when I can deal with the whip.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ BayouRadioAmplifier:
    hello
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.
  • @ BJ radionut:


      Top Bottom