• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

2/70 antenna placement

my uhf/vhf is nmo put right at the back of the cab on my ranger,,,, i just took off the brake light lens to give me room and used a old speedo cable to route cable down into the cab,,,,i used a larsen antenna with a slight bend to make it stand straight up,,,, i dont have any problem getting into repeaters and have communicated well over 15 miles simplex,,,,,,
 
Is it normal to lose interest after getting a ham license? I've been fairly active on 11 meters when it's open, but I only flipped thought 10 a few times. I heard a cq and thought it was kinda cool, but I kept on scanning. Just seems kinda weird that I can now, buy I really have no desire. Maybe it is just a grass is greener thing?
 
Is it normal to lose interest after getting a ham license? I've been fairly active on 11 meters when it's open, but I only flipped thought 10 a few times. I heard a cq and thought it was kinda cool, but I kept on scanning. Just seems kinda weird that I can now, buy I really have no desire. Maybe it is just a grass is greener thing?
I always seemed to have flipped around with ham. Currently I'm doing (well trying) a lot of SOTA and driven to come up with the lightest efficient set up possible with the least amount of $$. Previous to that was a portable car camping station off of solar.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.