J
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
J
jmtnman
Guest
Hi,
There really isn't.
The 'Talkback' mentioned for the HR series is not really talkback but
RX feedback caused by the receiver not fully switching over in tx mode.
It usually is barely noticable with a stock mic and an external speaker.
I am not sure if the switchover problem was fixed in the 2600.
I know some of the later 2510's were modified at the factory to remove the feedback problem.
I have not seen a successful mod to 'add talkback' to a HR series radio.
Roger
</p>
There really isn't.
The 'Talkback' mentioned for the HR series is not really talkback but
RX feedback caused by the receiver not fully switching over in tx mode.
It usually is barely noticable with a stock mic and an external speaker.
I am not sure if the switchover problem was fixed in the 2600.
I know some of the later 2510's were modified at the factory to remove the feedback problem.
I have not seen a successful mod to 'add talkback' to a HR series radio.
Roger
</p>
Hi,
There really isn't.
The 'Talkback' mentioned for the HR series is not really talkback but
RX feedback caused by the receiver not fully switching over in tx mode.
It usually is barely noticable with a stock mic and an external speaker.
I am not sure if the switchover problem was fixed in the 2600.
I know some of the later 2510's were modified at the factory to remove the feedback problem.
I have not seen a successful mod to 'add talkback' to a HR series radio.
Roger
</p>
There really isn't.
The 'Talkback' mentioned for the HR series is not really talkback but
RX feedback caused by the receiver not fully switching over in tx mode.
It usually is barely noticable with a stock mic and an external speaker.
I am not sure if the switchover problem was fixed in the 2600.
I know some of the later 2510's were modified at the factory to remove the feedback problem.
I have not seen a successful mod to 'add talkback' to a HR series radio.
Roger
</p>