Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

a different meter....

  • Thread starter Thread starter oldslowchevy
  • Start date Start date
O

oldslowchevy

Guest
is there another kind of meter out there other then the astitc, dosy, or bird meters that are reasonably priced and accurate?

i would like it to do from 0-500 watts rms and swr, modulation would be nice but i won't cry if it doesn't have that.

i just like to be different.
 

Sure are.
Palstar WM-150 (if you can find 1 grab it) Palstar 2000a,
If you are into kits then the tentec1225 kit. I have 1 and it reads the same as a bird.
 
If you can find one, a TRANSEL MARK IIA (made in the late 70s) is a good choice. Accurate, large meter face,3 power levels, SWR, headphone jack and volume control for AM. Sending unit can be removed for remote mounting. Old, but a solid meter. Just another option.

- 399

TRANSEL MARK IIA WATTMETER | eBay
 
I understand LMA:lol:!! I was just razzing ya bud :wink: Although I would like one of these meters to play with and would never need another meter again as far as the HF bands go :thumbup:
 
  • Like
Reactions: 1 person
Sorry, just could not resist.
But seriously now just get a good hf meter. I've had two palstar's (wm-150, 2000a) and have the tentec 1225. All thre requires 12vdc to work as they are true pep reading meters. All rank up there in my books.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom