• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

AND THE WINNER .........


It's not a CB. It's most of an AM table radio, probably pre-WW2, judging by the octal-base tubes. If I had to guess, it looks like a TRF receiver, and not the superheterodyne design we take for granted. It probably used a wire-loop antenna and an "electrodynamic" speaker. Before WW2 permanent magnets were expensive. A solenoid coil would become the "exciter" magnet to make the speaker's voice coil push against. A couple thousand turns of wire would do the trick. It was also common for the audio output transformer to be mounted on the speaker, and not on the main chassis.

Would be cool if there was a closeup pic of the plate with the brand and model number on it.

Might have parts value to someone restoring pre-WWII radios. Kinda depends on how much time it spent at the bottom of the creek.

73
 
  • Like
Reactions: Handy Andy

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.