You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Anyone have a sugestion for noise in big truck ?
- Thread starter bubby1
- Start date
Nice trucks, but lacking counterpoise and not much you can do about that so the best you can do to make sure the antenna mount has a good bond to the frame of the truck and the cab chassis to the frame and as said before try to locate the source of interference.
Radio is a magnum s3.By chance where is the power supplied from to the roof mounted power points?I noticed when the headliner was down that the 2 wires coming off the power points lead to a small white connector which had a tag that read cb.I could not follow any further due to all the wiring up there so much in fact that I could barely get my hands in there.
Look for a LC filter they sell them for ham radios, also make sure EVERYTHING is grounded good!
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.