Anyone have Sams photofact #49, need info

[Radio Tech]

Need some info on a Courier Gladiater. Crystal controlled.

Need to know What driver and final transistors are.
Also what X1 is (11 meg). All three components are missing.
Been 15 years since I opened the rig and would like to restore it.

Thanks

 

[MisterFatty]

Without looking at the Sams, it would be a good guess the Driver was/is a 2SC1306, and Final a 2SC1307... I'll go in the back room in a few minutes here and confirm, as well as check on X1....

 

[Radio Tech]

Thanks. I am thinking the transistors are that.
After looking further at the crystals X1 has to be a 11.000 meg.

 

[MisterFatty]

X1= 11.000MHz
driver= 2SC1306
final= 2SC1307

Confirmed with my Sams...

 

[Radio Tech]

Thanks!
I appreciate it.

 

[MisterFatty]

Thanks!
I appreciate it.

YW, If you need Schematic, or any of the other Sams material LMK, I have a pretty decent camera and can probably get legible copies of it...

 

[Radio Tech]

That would be great. I will let you know.
At the moment, the rx is decent so may need a slight touch up. Even with the driver and final removed and jumped it had a strong rf carrier. I was experimenting with this rig years ago and had removed and jumped the finals. Built a small 50 watt amp and installed in the back of the radio. The amp had smoked some months later and I never got around to repairing it.

But since I bought this thing when I was a teen ager I like to restore it.
Thanks for the help.