Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

anyone have the voltage chart for a galaxy dx 919?

D

doc919

Active Member
Dec 6, 2012
148
13
28
52
mid south tennessee
Having. A hard time finding what the issue iswith the radio. I have the schematics. But would like to know what the volts/amps should be for comparrison
. Thank you for any help. I have changed q54/55/37 both driver & final. Biasing volts at the 520's are 3.86v.. still has no carrier,no output modulation (can be heard through the talkbackbut weak). Voltage goes up on deadkey & at modulation both,but still no outputoutput
 

Yeppers that is where I got my schematic from. I also have a list of the barios resistors etc with their values bit still no voltage diagram. Thank you for suggesting the link.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom