-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Anytone 5555
- Thread starter Zman
- Start date
I've been kind of intrigued by this radio, but haven't been able to find a place to buy one. Where can you get it?
Pretty big markup. I bought mine from an electronics store in China for $119.00 USD (+ $14.50 USD shipping). Check out ALIBABA.
Now that would be a good deal. Why don't you go ahead and provide a linky of the kiddies
at-5555 is similar to the cree but the cree 8900 is a much better radio all round.
Have not switched on an at-5555 since I got the cre..
Have not switched on an at-5555 since I got the cre..
got the AT 5555 version 5, downloaded version 5 software and it does not work. Downloaded version 6 for a Maas 5000 but when I go to write to the radio it says " wrong band type" Anybody have any idea how to program it?
send an email to anytone with the serial number of your radio and they should be able to help out. I think the cables are all standard but would not bet on it.
dave it came with a cable in the box plus I have the stuff from my original Alpha and the CRT SS 6900, the radio does say PC when I am reading the programing in the radio so I think they are talking to each other guess I just don't have the correct program. Ya know it stinks, the CRT radio had a green wire that cut would do from 26.500 to 28.8 so it got coverage with the 11 meter band. I just thought this one would have somewhat the same, yea shame on me for thinking LOL
I have version 5, when I try to program it it says it needs firmware 6, 5 doesn't work. Someone sent me an email how to push some buttons on the front and all is well now I got it to go to 11 meters. I guess I will still need firmware 6 to go above 28.305. I just go there ans listen and some repeaters in the New York area on 29.610 and up a little on FM. Bet the Huracan won't be this tough LOL
I have a problem with the cre 8900 when I try to program in frequencies above 28.305 while in the 11m mode it won't accept them and the radio reverts to 10m mode and std channels and when I switch back to 11m mode it has also reverted to std and all my frequencies I had programmed in gone back to std 40ch banks.
Is this what is happening to you?
I would like to have 10m and 11m in there the way I like it but no go...
Is this what is happening to you?
I would like to have 10m and 11m in there the way I like it but no go...