Anytone AT-5888UV Resources, Schematics, Tricks

[Tom Line]

Looking for resources for the Anytone AT-5888UV, schematics, tricks etc. Just picked one up with tri band 2m, 220, 440 and it seems to work pretty good. Wondering if a schematic or service manual has ever surfaced or if any salty individual has figured out the key combo to get into the service menus.

 

[Tom Line]

1. Hold right "SCN" button during power-up and it will factory reset.
2. Hold "TV/SQL" or "SET" (forget which) during power-up
will cause display to say MODE : 1 or 2. I suspect this is
amateur/professional mode. (Think it should be 1 for hams.)

 

[Tom Line]

1. Hold right "SCN" button during power-up and it will factory reset.
2. Hold "TV/SQL" or "SET" (forget which) during power-up
will cause display to say MODE : 1 or 2. I suspect this is
amateur/professional mode. (Think it should be 1 for hams.)

Looks it may be 1=open 2=amateur bands only

 

[Tom Line]

A better front panel diagram than in the manual.

 

[Tom Line]

Enhanced drawing. Has frequency and power info.

 

[Tom Line]

Found a correction for setting HOME channel in the manual.

 

[sgtevmckay]

Looks it may be 1=open 2=amateur bands only

Greetings.

Has a determination been made as to which mode operates tx/rx in which bands ?

 

[DonSkin]

Found a correction for setting HOME channel in the manual.
View attachment 63328

Needed this. Thanks