Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Anytone at5555n2

S

Slim304

Member
Dec 31, 2019
26
6
13
31
Anyone use the TalkBack and sounds like the echo is on but it's not but your voice coming through the radio has echo is there a way to make it normal besides turning the talkback off?
 

Slim304 said:
Anyone use the TalkBack and sounds like the echo is on but it's not but your voice coming through the radio has echo is there a way to make it normal besides turning the talkback off?
Click to expand...
It's not the echo you're hearing, it's the delay in the noise reduction circuit. Turn off the NR and listen to it again.
 
  • Like
Reactions: Pez
Do you have another radio turned on in the shack, monitoring? We have had similar questions before, and in these cases it has ended up being only the TX and RX processing delays, causing the "echo" sound when monitoring your own audio with different RX sources.
These radios run the audio via DSP and therefor they have a small processing delay.
Turning the TalkBack volume down a bit should help.
 
Pez said:
Do you have another radio turned on in the shack, monitoring? We have had similar questions before, and in these cases it has ended up being only the TX and RX processing delays, causing the "echo" sound when monitoring your own audio with different RX sources.
These radios run the audio via DSP and therefor they have a small processing delay.
Turning the TalkBack volume down a bit will help.
Click to expand...
No I don't
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom