• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ARRL to FCC: “Grow Light” Ballast Causes HF Interference, Violates Rules

ARRL

Well-Known Member
Nov 15, 2008
10,928
53
58
The ARRL has formally complained to the FCC, contending that a “grow light” ballast being widely marketed and sold is responsible for severe interference to the MF and HF bands. The League urged Commission action to halt sales of the Lumatek LK-100 electronic ballast and to recall devices already on store shelves or in the hands of consumers. In a March 12 letter to the Commission’s Enforcement...





More...
 

Through some prolonged studies, I have determined that Obamacare causes interference to HF transmissions. FCC should look into that.
 
  • Like
Reactions: 4 people
we tracked down a house full of 15+ ebay switching ballasts up the road from my ham buddy, he had s9+ across hf bands,
the occupier fled the scene in the early hours never to return,

they are cheaper to buy and run than old magnetic ballasts, the downside is you are likely blasting rfi around your neighborhood that turns off and on in well known patterns making it pretty obvious whats going on like a BUST ME beacon,

using cheap ballasts is similar to nailing an IGROW sign to your gate.
 
Two points for the ARRL getting Charlie to consider doing their job. Remember if they were doing their job, this junk would never make it to the market in the first place.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.