Astatic 575 M-6 Mic issues

[long night]

Does anyone have a short video showing the keying switch working on the Astatic 575 M-6 mic. I have a problem with mine and need to see the keying switch in action to address the problem.

Thanks Chuck Saylor

 

[Holydvr]

Not sure exactly what you mean? You mean keying the switch with the back of the mic off?

 

[long night]

A picture of the mic with the back off would help me determine if mine is correct or not. I can not find one on line. If you can provide that picture I would be most grateful Sir!

 

[sp5it]

Should help. 2 versions.

 

[long night]

I need to see how the keying switch in the picture with the green board makes contact with the plastic key itself. If you have a picture of that it would help me.
Thank you Sir.

 

[long night]

Trying to be more specific, does the keying switch with the slot around the sguare post fit into the plastic key some how? That is where a picture would be very helpful.

Thanks again

 

[Low_Boy]

Maybe you should post a picture pointing to what you want to see.

 

[H1driver]

The PTT does not fit in the notch, if I am understanding what you are asking.

 

[H1driver]

The notch on the square switch shaft?

 

[Low_Boy]

That picture looks exactly right. Then there is a little foam washer where the round hole is. Sometimes they are missing and the key where your thumb goes is a little wobbly.

 

[long night]

That picture looks exactly right. Then there is a little foam washer where the round hole is. Sometimes they are missing and the key where your thumb goes is a little wobbly.

H1 driver, your pictures show me exactly what I am looking for! Thank you for your help here. Chuck Saylor