• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Bad relay in 200 GTL

DTB Radio

Well-Known Member
Sep 14, 2005
1,105
216
73
56
Carlisle, PA. USA
www.dtbradio.com
I had a 200 GTL come in with a goofy receive issue. After unkeying, the receive would "wobble" in and out, almost like an antenna whipping back and forth next to a stack, causing the signal level to drop way down and come back up again. After some head scratching and tapping here and there, it seemed to track to the general area of the receive coils. I touched them up, and same problem. I finally tried tapping on the relay (dont know why I didnt try taht first....), and that seemed to be the problem. I swapped it out, and that took care of it. Just wanted to post the symptoms and the cure for anyone who runs into a similar problem.
 


dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello