• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

CB mic cord extension

New cb user

Member
Nov 1, 2013
47
7
18
I'm rigging a cb up in the dash of my car. Because of how it's going to fit I need an extension for the cord. I'm running a JCPenny 6221 with a plug in the side instead of the front for the mic. My dash has so much plastic and I hate cutting and drilling into the plastic because it does not look good when the equipment is removed. I'm going to have to do some cutting in my drink holder for the radio to fit but that's not an issue because I do have a spare drink holder. My tape deck used to be in this spot. The only way I can rout my mic out of the dash is through the drink holder where the cover used to latch down. My cord is to short for this though so I need about 2 of cord feet to extend my reach and create a good looking setup. I want this extension stationary in the center console but I want to still be able to unplug my mike and just have the plug sitting there in the console. Does anybody know if they make any mic extensions or am I going to have to rethink my rig.
 

Ok. Thanks for the answers. I'm going to check the local shops before I buy them online but I wanted to be sure that what I am after exists.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.