Hey: Gang.
I'm really stuped with this Cobra 139xrl I'm working on.
I recapped the entire radio including the tantalum & electrolytic capacitors. I also replaced the four 2sc1419 regulators with new ones.
The radio will only put out 1 w on AM & 3 w on SSB.
I replaced the 2sc1306 driver & 2sc1307 final with new old stock ones I had, same issue still.
I even replaced the pre driver 2sc1973, issue still excists.
I even installed a new relay, did not solve the issue.
I'm totally stumped.
Any suggestions guys as I'm pulling my hair out with this radio.
Thanks in advance.
I'm really stuped with this Cobra 139xrl I'm working on.
I recapped the entire radio including the tantalum & electrolytic capacitors. I also replaced the four 2sc1419 regulators with new ones.
The radio will only put out 1 w on AM & 3 w on SSB.
I replaced the 2sc1306 driver & 2sc1307 final with new old stock ones I had, same issue still.
I even replaced the pre driver 2sc1973, issue still excists.
I even installed a new relay, did not solve the issue.
I'm totally stumped.
Any suggestions guys as I'm pulling my hair out with this radio.
Thanks in advance.