Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 148gtl no tx audio

941Texas

941Texas

Member
Jun 30, 2009
39
1
18
Hello all,

I have a cobra 148gtl i removed a roger beep module from. now i have no tx audio. when i turn the mike gain all the way up i get a feedback and very faint audio in background. could anyone help with a good starting place to start looking.

941
 

If radio worked fine before removing the module you should backtrack and look the wires to make sure they are where they belong. Sounds like maybe the audio wire is not where it belongs?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom