-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Cobra 2000 no modulation.
- Thread starter Brian Gosper
- Start date
What's everyone think of to use this as a replacement for VR12?
This one?????
Or this one????
This one?????
Or this one????
Either one of those will work fine. One has a shorter height, but otherwise they are the same.
Since you have it working now, there is another option.
That the pot you got in there now - works and you will find yourself at a point where you no longer need to "play" with it and just use it. In that case just measure the resistance across those terminals that solder to the board - then remove the variable and use a FIXED resistor - solder it in the place of the variable and be done with it.
You can then use that variable back in the other radio you took it from to try and make this radio work.
You can then keep both radios working or serviceable to a degree.
That the pot you got in there now - works and you will find yourself at a point where you no longer need to "play" with it and just use it. In that case just measure the resistance across those terminals that solder to the board - then remove the variable and use a FIXED resistor - solder it in the place of the variable and be done with it.
You can then use that variable back in the other radio you took it from to try and make this radio work.
- (...If you decide that the 2000 is going to be up for sale - then perhaps a variable is needed so the next owner can play with that radio as needed for their own entertainment and enlightenment...)
You can then keep both radios working or serviceable to a degree.
Last edited:
As far as i can tell, With a S9 signal into it, the squelch kill's the sound around 2 O'clock, But I've only got the Synthesizer alignment done so far,
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-