Cobra 2000mosfet

[BAGEBOY]

What is the agenda pep power of a cobra 2000 when it is molded.with a mosfet
Saw local use a Rt1 mosfet instead of a irf5@0 said.it was a bit better on the meter have seen a few mods but I am looking for the most effect mod

 

[Shadetree Mechanic]

I would not worry about getting more power out of it. I would run an amplifier with it. If you can get more power, the power supply won't be able to handle it as it can barely run a stock radio. The power switch is the next weakest link and becomes problematic even at stock power levels.

 

[BAGEBOY]

I would not worry about getting more power out of it. I would run an amplifier with it. If you can get more power, the power supply won't be able to handle it as it can barely run a stock radio. The power switch is the next weakest link and becomes problematic even at stock power levels.

I saw a few.modded so.i was curious

 

[nomadradio]

What is the agenda pep power of a cobra 2000 when it is molded.with a mosfet

Approximately zero once the power supply is damaged and shuts down. The power drain of a MOSFET final will prove too much for the radio's factory power supply.

And if you're willing to power the radio from a larger external supply, you might see 20 Watt peaks or so if everything goes perfectly.

73