You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I did a mosfet mod 2030 and after the mod was done, R46 resistor burnt up. Did this mod before and never had this problem. I repaired R46 resistor and it burnt up again?? So its got to be something else. Any ideas were to look?? Thanks.
i would start by unsoldering the erf2030 then check the board for solder in any unwanted places. then replace the resister and see if it burns up. if it dont use a new erf2030 and isolaters.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.
